[Allby Corry]

Todd,

Yes, I have the NORCO-4618 controller.
Well I’ll install one more hard drive and try a RAID made using the SATARAID5 utility software.

Thanks.
Allby

[Allby Corry]

Thank you, Thomas.

I’ll try create a raid using the card.
The drives inside the unit are connected with 4 separate Sata cables but the connection to computer is only one cable via eSata.
This eSata card and cable is included with the unit and the manual say that I can get up 230MB/sec.

Thanks.
Allby

[Allby Corry]

Todd,

I was rereading the manual and look what I found about using the Windows Disk Management:

“The SATARAID5 utility software provides advanced
RAID configurations (please refer to Appendix I) including Disk Striping (RAID0), Disk Mirroring (RAID1), Disk
Mirroring and Striping (RAID 0+1), Parity RAID (RAID5), Concatenated and JBOD. However, the data transfer performance may be lower than setting RAID using the OS Disk Management.”

Cheers,
Allby

[Allby Corry]

Hello Leo,

Yes I’m using Raid-0 with stripe made with Windows disk management.

And yes, can configure the Raid with the software which the unit comes with but I had tryed it and not see difference.

Maybe I’m not doing it correctly.

Cheers,
Allby

[Allby Corry]

Thank you, Tood.

So I need to 1 more drive in the box, right?

Yes, it came with a RAID management software.
I must use Raid-0 or Raid-5?

Cheers,
Allby

[Allby Corry]

Hi Tracy,

Thank you again.

Corry

[Allby Corry]

Thank you Tracy,

And if I set the project to HDV – 1440×1080.
The Decklink HD support this resolution?

Regards.

[Allby Corry]

Thank you Callum,

There is some loss of resolution in this scale?

Regards

[Allby Corry]

Hi Mario,

You can tel me what is the difference between MXO2 and MXO2 Mini?

Regards.

[Allby Corry]

Thank you guys.

Cheers.