[Alex B carr]

If you turn metadata off in the PC-4 the clips will load in Resolve. I was working on Set and I discovered this, it seemed to appear while shooting above 60fps in HFR mode, we had a lockit box plugged in and that was the issue. The clips didnt load into F65 RAW viewer or Davinci.

[Alex B carr]

I’ve got the Asus Z9PE 2011 socket Dual Xeon. Currently just one GPU GTX 680, but 10GE, HD/SDi, and x2 ATTO cards.

I’d say Davinci works pretty well in Windows 7 and Mac Mountain Lion. The GTX 680 was overheating so I switched to a water cooling setup. Temp dropped from 75C+ down to 35C.

[Alex B carr]

So what kind of performance are you getting with F65 Material? i’m considering squeezing another 680 or swapping for a 690 into my setup.

I’m currently getting 24FPS playback in 1/2 Resolution. I only get 16-18FPS in Full resolution. 1/2 Res exporting 55-72FPS to DNXHD36 1080p. 45-55FPS exporting to ProRes 1080. I seem to get better performance in 10.8 Mountain Lion than Windows 7. Playback at 1/2 res on windows drops below 24fps occasionally. Pretty strange, because all benchmark programs show higher GPU performance in Windows. Most programs show 120FPS+, in 10.8 Mountain Lion I rarely get above 60FPS.

My setup:
x2 2.71ghz 8 Core Xeon. (16 Physical, 32 Threads)
64GB 1333mhz RAM
GTX EVGA 680 FTW 4GB
x12 2TB connected to ATTO H6F0.

CPU and GPU are watercooled, currently I need the other slots for Myricom 10GE, HDSDI, and ATTO H6F0 and H680. I use this setup on set and not only in Post. I’m trying to configure a valve release setup, So i can remove a GFX card from the WaterCooling Loop when not needed.