Replies – Forums – Alan Teo

Forum Replies Created

Alan Teo
November 15, 2011 at 5:51 pm in reply to: ATEM: Reassign buttons on broadcast panel

I believed its called “crosspoint mapping” . Its still unavailable and I heard Blackmagic is working on it for a future update

Alan Teo
Pufferfish Productions
Alan Teo
June 12, 2011 at 4:59 pm in reply to: HD multicam guidance

Anyone here facing delays issues with the PGM output??
I seemed to have a delay of about 5 to 7 frames which is totally unacceptable for IMAG productions.
Alan Teo
January 7, 2011 at 6:10 am in reply to: Need advice on DVI out on AG-HMX100

hi guys,
anyone able to get the dvi multiviewer to work on 576i mode???

I can get the multiviewer dvi output to work on all formats (480i, 720p n 1080p/i all fine) except 576i.
Alan Teo
January 5, 2011 at 5:18 pm in reply to: Need advice on DVI out on AG-HMX100

u can try Panasonic hpx 170.

im not sure if the component out of XHA1 is HD or not.
Alan Teo
January 5, 2011 at 5:37 am in reply to: Need advice on DVI out on AG-HMX100

1. set the hmx100 to SD mode..
2. make sure your XHA1 is in SD mode too
3. make sure the camera output is set to V2. (there a switch at the back of the camera near the battery slot)
4. connect your XHA1 via the BNC port to the video in of HMX100.

By default It should work.
Alan Teo
November 19, 2010 at 6:30 pm in reply to: Panasonic HS400 down conversion issue

chuck,
which device did u use? I used a blackmagic Sdi-to-analog and it gave me one frame delay after converting.
Alan Teo
July 8, 2005 at 9:27 pm in reply to: question on video impedence…

Thanks alot. I got it. 🙂
Alan Teo
July 8, 2005 at 9:24 pm in reply to: question on video impedence…

So in other words, if I don’t terminate at the last item, the video quality will drop???
Alan Teo
April 10, 2005 at 7:15 am in reply to: DVD authoring software

thanks for all the replies… since i am using windows platform, I think i will check out Sonic Scenarist. 🙂