Replies – Forums – Aboud Orfali

Forum Replies Created

Aboud Orfali
March 22, 2015 at 1:10 pm in reply to: AJA KONA 3g VS DeckLink 4K Extreme 12G

Dear Shane;
Thank you for your reply; as for the NLE used it is a 4K workflow with the new 8-cores Mac Pro (Final Cut Pro x / 4:4:4:4 codec ).

Thank you for all the help and support .
Aboud Orfali
April 7, 2014 at 6:04 am in reply to: Final Cut Pro

Yes I swapped the video cards and all the cables one by one and still get the same result.
Thank you
Aboud Orfali
April 6, 2014 at 11:54 am in reply to: Final Cut Pro

Hello again ..
I have tried replacing different parts from the cables and still getting the same result;in addition i am now having a (lipsing) problem which occurred several times on different locations of the time frame . Any ideas ?? Thank you for all the help & support .
Aboud Orfali
March 19, 2014 at 2:13 pm in reply to: Final Cut Pro

Thank you for your reply. I will try this and return to you .
Aboud Orfali
March 3, 2013 at 10:48 am in reply to: AJA Kona 3G

Thank you for your concern .. I had my problem fixed the problem was in the connection between my Break out Box and the PCie.

Thank you
Wish you all the best.
Aboud Orfali
February 27, 2013 at 10:06 am in reply to: AJA Display Problem

Dears;
Greetings..

I have the following setup:
Apple Mac Pro 2.4 (12 cores)/FCP 7.
AJA Kona 3g with breakout box.
Panasonic HD Broadcast monitor.
Final Cut is set to 1080 /25i 10 bit.
Here is the problem:
with the previous setup i can not display image on the Panasonic using the HDMI connection,I also cant get any image when playback on the FCP with as I only get sound.
Thank you for your suggestions & help
Regards
Aboud