[Wally Rombach]

I’m making it from DVDSP.

wally

[Wally Rombach]

Walter:

Called LaCie. I had a power supply connected to the Terabyte drive that was too small. The supply that came with the unit works just fine now. Lesson learned (and luckily I didn’t damage data – or damage the other supply).

Thanks,

Wally

[Wally Rombach]

Thank you Walter, I will call Lacie tech support.

Wally

[Wally Rombach]

Bob:

Thank you for responding, Bob.

I think we may have solved our problems – at least for now.

We upgraded Final Cut from 4.5 to 5.1. Then, we upgraded the Kona 2 card to version 2.0 firmware. Finally, we put in an ATTO UL4D card for the Medea Terabyte drive.

All of this seems to work now with the Panasonic DVCPro HD deck.

Question: The HD video was shot on a Varicam at 720p, 24fps. When I load this into Final Cut at HD uncompressed, should I load it in at 720p, 59.97? Is that what the deck will want to see when we go to master the program back onto DVCPro tape?

Wally

[Wally Rombach]

Jeremy:

Thanks for the response.

I think we may have solved our problems. First, we upgraded the Kona 2 card to Kona 2.0. Then we loaded FCP 5.1. Then, we bought an ATTO UL4D card for our Medea (Terabyte – 5 drive) storage drive.

Problem apparently solved.

Wally