Replies – Forums – Thomas Frank – Page 33

Forum Replies Created

Page 33 of 39

← 1 … 32 33 34 … 39 →

Thomas Frank
March 9, 2011 at 2:43 pm in reply to: DSLR or not DSLR?

Interesting is I did not get a email notification on your reply Noah…

Anyways, thanks for your input guys (that is why I like coming back to the Cow!) I was thinking of the same.
But (bad but not so bad I guess) I think I will stick to the noise XLh1s for now and pimp it out.

At the moment I just can’t really justify why I want to replace a 6 Months old camera. Lets wait out and see what RED will deliver. 🙂
Thomas Frank
March 6, 2011 at 7:04 pm in reply to: AF100: what’s included?

What about a Battery and Charger?
Thomas Frank
March 5, 2011 at 4:52 pm in reply to: Glide or Steadicam for Xl h1s?

Thanks for the info… yeah that is what I thought.
I think a GlideCam should be good enough for what we do.

Thanks!
Thomas Frank
February 17, 2011 at 10:43 am in reply to: 7d transcode to prores results in dark pictures

hmmm doesn’t ProRes generate a darker image no matter what system or software?

Or is there way to prevent ProRes to make the footage darker?
Thomas Frank
February 17, 2011 at 10:39 am in reply to: Uploading 20 Gb. of raw footage?

IDSN be faster then DSL???
WOW in our Country we make fun of People that still use ISDN…

😉
Thomas Frank
February 14, 2011 at 5:53 pm in reply to: Time Code not in Sync with the Deck

The AJA IoHD: 25 Panasonic VTR is the only setting that will control the Deck. ( I do not recall seeing a 29.97 or 30 Panasonic… but I will check tomorrow)
But as long as my Capture input is correct there should be no issues.
The AJA IoHD is wired over Firewire 800 and the Deck is being controlled over RS-422.
Anyway, I suspected also the tape was junk so I tried another tape and the time code matched on both readers.

So I would say my bad 🙂 but will keep eye on it. 😉
Thomas Frank
February 14, 2011 at 10:01 am in reply to: Canon XL H1 HD issues/problems

A little update…

I send the Camera to a Canon service center and it they can not find any issues.
His excuse was cause it is a NTSC region it will not be as good as the PAL region. But this will not cause a noise level as it does.

Anyhow I will be getting the Camera back tomorrow with the footage the service center captured.
So I am guessing the footage look like my then camera a high noise tolerance. (Yeah we should have purchased the Panasonic AG-AF100)

At the moment I am hopping it was a setting that i jacked up that they might have reseted!

Will keep up to post if any issues will come down my time line…
Thomas Frank
January 5, 2011 at 12:31 pm in reply to: No Reflection after applying mask

Okay I got it its the Image Mask! Which sucks cause know I have to rebuild the Rectangle object as a mask boooo!
Thomas Frank
January 2, 2011 at 12:03 am in reply to: Canon XL H1 HD issues/problems

I would always recommend shooting in the FULL auto mode so that you can (and have to) set all the parameters yourself.
You mean full manual mode so I can set all the parameters myself?

No, No the footage was taking (samples above) in the manual mode.
So there is only one gain adjustment on the camera the round dial nob?
After my break I will sit down and check the settings and do some more tests.
Thomas Frank
January 1, 2011 at 2:15 pm in reply to: Canon XL H1 HD issues/problems

“That may be, but even if it’s set to 0 or even a negative number if you have the auto gain switch active it obviously wouldn’t make a difference. Are you positive that’s not/wasn’t active?”

Which auto gain switch do you mean? Out side on the casing or in the Menu?

Page 33 of 39

← 1 … 32 33 34 … 39 →