[Thaxter Clavemarlton]

There is a function in FCP that is often overlooked… and it can help with many audio and video “skipping”, “sticking” and “missing” problems.

You should “Mixdown” the Audio for playback before you dub out of FCP, or during the edit, if you have audio/video stuttering, drop-outs, sync-slippage, or freezes.

NOTE: Mixdown has even been demonstrated to help with slipping, skipping problems (or “missing” audio clips) for files being EXPORTED as QT (or similar) files out of FCP.

First, SELECT ALL of your audio tracks (highlight them) on the timeline, then:

Sequence Menu > Render Only > Mixdown.

You should see a dialog box telling you its rendering.

It might seem to make little sense that “Mixing down” even simple audio tracks will “fix” complex video “freezes” or random audio dropouts to tape or export, but it CAN.

NOTE: It does not matter of you only have one audio track, if there are random freezes during output, you should try the Mixdown.

[Thaxter Clavemarlton]

“Sync-slippage” can happen during some longer captures.

Tapes recorded on certain camcorders from Canon have been somewhat more problematic but it also can happen with other brands of cameras as well.

To reduce the problem on capture, break your captures into sections no longer than about 10 minutes each.

You can then “reconstruct” the full tape’s recording (or any longer takes) quickly if you need to.
Mark (and log) your first clip to End (Out-point) about 10 minutes or less from its In-point.
Continue to mark (and log) your clips this way throughout the rest of the tape.
Just make sure the In-points of the subsequent clips are EXACTLY ONE FRAME LATER than the Out-points of the previous clips.

You can do all this while actually scanning the tape(s) or just by inputting arbitrary TC numbers, logging them… then use Batch Capture to bring in all of your clips.

Its very easy to then “reconstruct” the shorter clips back to any “continuous” length you want on the timeline by just “clicking” them on in order.
EVEN FASTER… select ALL successive clips at once in the browser (with the browser column-order set to “Media Start” highlight all clips) and drop them, all at once, on the timeline… they’ll all pop up in continuous order.

Also read this link:
https://docs.info.apple.com/article.html?artnum=58640
It contains more “sync-loss” info.

[Thaxter Clavemarlton]

There is a function in FCP that is often overlooked… and it can help with many audio and video “skipping”, “sticking” and “missing” problems.

You should “Mixdown” the Audio for playback before you dub out of FCP, or during the edit, if you have audio/video stuttering, drop-outs, sync-slippage, or freezes.

NOTE: Mixdown has even been demonstrated to help with slipping, skipping problems (or “missing” audio clips) for files being EXPORTED as QT (or similar) files out of FCP.

First, SELECT ALL of your audio tracks (highlight them) on the timeline, then:

Sequence Menu > Render Only > Mixdown.

You should see a dialog box telling you its rendering.

It might seem to make little sense that “Mixing down” even simple audio tracks will “fix” complex video “freezes” or random audio dropouts to tape or export, but it CAN.

NOTE: It does not matter of you only have one audio track, if there are random freezes during output, you should try the Mixdown.

[Thaxter Clavemarlton]

As a starting point, adjust the Settings to my “all 2’s” formula:

Threshold (db) -20
Ratio 2
Attack Time 20
Release Time 200
Preserve Volume CHECKED (very important!)

Now click the viewer to display the actual audio track and set the Level to “2” or “3.”

Now, when you play the track it should be at a “more consistent” level.

You can play with my “all 2’s” formula if you want, but its a good starting point for compressing the levels without a lot of compressor “pumping.”
The “Threshold” setting will affect the clip the most… as you slide left, it brings more of the low levels UP.
The actual volume adjustment now comes from the “Level” slider on the actual audio track (and you can key-frame that if you want.)

[Thaxter Clavemarlton]

Just for fun.

I made my own boom pole for about $15.

Its simply an aluminum extendable paint-roller handle.

I KNOW is not a $435 graphite whiz-bang, but it holds a mic near the talent when I need it.

Its light-weight and it works just fine.

The “screw” end is rather soft plastic and it was easy use a “Dremel Tool” to quickly whittle down the end to a size that a standard screw-on mic clip would fit.

You can find these poles in various lengths at Home Depot, Loew’s and similar home centers.

It couldn’t hurt to just LOOK at one, pick it up and SEE what you think.

[Thaxter Clavemarlton]

There is a function in FCP that is often overlooked… and it can help with many audio and video “skipping”, “sticking” and “missing” problems.

You should “Mixdown” the Audio for playback before you dub out of FCP, or during the edit, if you have audio/video stuttering, drop-outs, sync-slippage, or freezes.

NOTE: Mixdown has even been demonstrated to help with slipping, skipping problems (or “missing” audio clips) for files being EXPORTED as QT (or similar) files out of FCP.

First, SELECT ALL of your audio tracks (highlight them) on the timeline, then:

Sequence Menu > Render Only > Mixdown.

You should see a dialog box telling you its rendering.

It might seem to make little sense that “Mixing down” even simple audio tracks will “fix” complex video “freezes” or random audio dropouts to tape or export, but it CAN.

NOTE: It does not matter of you only have one audio track, if there are random freezes during output, you should try the Mixdown.

[Thaxter Clavemarlton]

3 frames is too long.
1 frame will probably look better.

[Thaxter Clavemarlton]

There is a function in FCP that is often overlooked… and it can help with many audio and video “skipping”, “sticking” and “missing” problems.

You should “Mixdown” the Audio for playback before you dub out of FCP, or during the edit, if you have audio/video stuttering, drop-outs, sync-slippage, or freezes.

NOTE: Mixdown has even been demonstrated to help with slipping, skipping problems (or “missing” audio clips) for files being EXPORTED as QT (or similar) files out of FCP.

First, SELECT ALL of your audio tracks (highlight them) on the timeline, then:

Sequence Menu > Render Only > Mixdown.

You should see a dialog box telling you its rendering.

It might seem to make little sense that “Mixing down” even simple audio tracks will “fix” complex video “freezes” or random audio dropouts to tape or export, but it CAN.

[Thaxter Clavemarlton]

Close this message and look about one inch below your original post for virtually the exact same question thread. 😉

[Thaxter Clavemarlton]

There is a function in FCP that is often overlooked… and it can help with many audio and video “skipping”, “sticking” and “missing” problems.

You should “Mixdown” the Audio for playback before you dub out of FCP, or during the edit, if you have audio/video stuttering, drop-outs, sync-slippage, or freezes.

NOTE: Mixdown has even been demonstrated to help with slipping, skipping problems (or “missing” audio clips) for files being EXPORTED as QT (or similar) files out of FCP.

First, SELECT ALL of your audio tracks (highlight them) on the timeline, then:

Sequence Menu > Render Only > Mixdown.

You should see a dialog box telling you its rendering.

It might seem to make little sense that “Mixing down” even simple audio tracks will “fix” complex video “freezes” or random audio dropouts to tape or export, but it CAN.

NOTE: It does not matter of you only have one audio track, if there are random freezes during output, you should try the Mixdown.