[Thaxter Clavemarlton]

[Fred Miller] “Just turn up the volume on the camera and you can hear your source for logging and capturing. I only mention it because it’s a little used feature on the camera and usually it’s turned way down, so you may forget about it. “

Good suggestion.
I use this built-in mini speaker method all the time as well.

Plus don’t forget, if you plug some good headphones into the camcorder, you will have a very fine audio monitor (at least for yourself).

[Thaxter Clavemarlton]

Glad to hear it all works for you.

And now that you know how to work with the EXTERNAL monitor, it is also good to know how and why to work only on the Mac (with the external monitor OFF.)

For getting the most “real-time” effects (so you can cut faster), you can turn OFF the “View > External >All Frames”.

You will THEN hear the audio only coming from the Mac’s speaker (and see the video only on the Canvas on the computer monitor.)

You should use amplified computer speakers connected to the Mac so that you can hear the audio better when working in this way.
Many people actually add an audio mixer so they can send ANY source (the camcorder, the Mac, anything else) into a good set of monitor speakers so they can really judge the quality of the sound.

[Thaxter Clavemarlton]

Ditto here.

[Thaxter Clavemarlton]

[shokugen] “(Q2) In FCP “Log and Capture” mode, I can preview miniDV tapes, but only video is shown. For some reason, audio is not coming out of my speakers although the audio meter are showing levels. And I even captured some clips and they played fine (V+A) on the timeline. I was told that this is an FCP feature and that i can only preview audio out from the PAL monitor, NOT from G5. Is that true? “

There IS a way that you can set FCP to monitor audio with the Mac speakers but it is better that you NOT do it.
On many systems it has caused some audible “Clicks” to be added to the captured material.

The better answer is that you should always work with an EXTERNAL monitor for audio and video.
It is standard procedure to have the audio and video connected directly from the A/V outputs of the DV camcorder or deck that is hooked to the Mac via FireWire.

That way when capturing you can see and hear the tape directly from the camcorder or deck while it is also feeding FCP via FireWire.
Then, after the capture, FCP will send its’ Audio and Video back down the FW to the camcorder or deck which will convert it and output the video and audio so that you can see/hear the quality of your edit on the external monitor.

HERE’S HOW TO MAKE THE EXTERNAL A/V APPEAR:

This list contains about everything to try to enable External Monitor VIDEO and AUDIO via FireWire, viewing in the Canvas window on the computer screen, and being able to record on the external FW device… carefully observe ALL steps.

Try things in this order until you find the “cure”:

1. Make sure you have View (Menu) > External > All Frames set.
(If the ALL FRAMES option is grayed-out… jump to step 6 below and continue.)
2. Make SURE your Canvas window (right window) in FCP is set to “Fit to Window”… AND that it has not been “pushed off” the edge of the computer screen.
3. Make sure your CANVAS View Menu (Box Icon with broken sides) is checked on Image or Image+Wireframe… NOT just Wireframe.
4. Make sure your CANVAS View Menu is checked on RGB… NOT just Alpha.
5. Make sure your Final Cut Pro (menu) > Easy Setup… is set for DV-NTSC (or DV-PAL, if that’s where you are).
6. Some camcorders/decks work better under “FW (NTSC/PAL)” -or- “FW (NTSC/PAL) Basic” control (in the capture settings). Try either setting to see which works best for your device.
7. Make sure your Final Cut Pro (menu) > Audio/Video Settings > A/V Devices (tab) > Mirror on Desktop > must be CHECKED. (If not, playing video will not appear in the Canvas.)
8. Make sure the “Log and Capture” Window is CLOSED and not just “hidden” behind other windows.
9. Turn off the power to the Camera/Deck/Converter Box, then turn it back ON.
10. Make sure the camera is in VTR mode… or the deck is in DV (DV, iLink, or FW) input.
11. On a Sony camcorder or deck, make sure the menu setting “A/V > DV Out” is set to OFF.
12. Re-check that your FW cable is well-connected at both ends (or try a new cable).
13. Important: Quit FCP, then Restart FCP.
14. Now again, make sure you have View > External > ALL FRAMES set…

If it still does not work. “Trash” the FCP Preferences on the Mac
https://www.kenstone.net/fcp_homepage/trashing_fcp_prefs.html

“FCP Rescue” is a free Apple Script that will Trash the Preferences.
It will also restore your user settings afterwards.

Download:
https://www.macupdate.com/info.php/id/14729

>Then, start again at my “step 1” above.

[Thaxter Clavemarlton]

How are you monitoring the video?

If you are trying to hear audio from the COMPUTER, try hitting “Apple-F12” which toggles the “External ALL FRAMES” on and off.

[Thaxter Clavemarlton]

What do you have selected for audio in the capture settings?