[Thad_h]

You should call the support Line or email xenasupport@aja.com and send the support staff your system info file. My suspicion is that the bandwidth on your PCI bus is very poor, but they can give you the tool to check that.

[Thad_h]

Multicam is supported by the Xena Card in Premiere Pro 2.0. However, one feature of MultiCam is not yet supported and there seems to be a bug with another MultiCam feature that may or may not be caused by Adobe.

Multicam Feature Not Supported by Xena

When selecting(i.e. has the Mouse/Keyobard focus) the MultiCam Monitor Window and hitting the

[Thad_h]

RAM Preview should be in RealTime for HD in AE 7. Please make sure of the following settings to ensure RT RAM Preview. First, make sure that the

[Thad_h]

https://www.jvcpro.co.uk/getResource2/dt-v1910cge_dt-v1710cge.pdf?id=4992

here is the link to the specs for that monitor. If you look in the ‘Scanning Frequency’ section, it shows the 59.94 so Im quite certain that monitor will preview it.

Double Check with JVC though.

[Thad_h]

Xena 2k/LH playout (*denotes Xena 2k only)

720p23.976 (with added 2:3 pulldown) plays out to 720p59.94 and can be converted to 1080i29.97* or 720x486i29.97

720p24 (with added 2:3 pulldown) plays out to 720p60 and can be converted to 1080i30*

Pulldown is added to 720p 23.976/24.00 as a 2:3 frame repeating pattern when being played out as 720p 59.94/60.00. So a frame sequence of 1,2,3,4,5,6,etc of 720p 23.976/24.00 frames on disc will be played out as 1,1,2,2,2,3,3,4,4,4,5,5,6,6,6,etc thru the Xena card. This pulldown adds no fields but just replicates frames. This is done according to the 720p spec since only 720p 50.00/59.94/60.00 can be transmitted on HD-SDI or HD Analog Component and pulldown must be added(during playback) or removed(during capture) when trying to use any other 720p fps.

[Thad_h]

Hi Bernardo,

The Xena 2K will offer you the most features for the conversion types you are needing.

From both boards, a 720p23.976 project will output at 720p60 automatically.

From the 2K board, you may also output a 720p23.976 project or file at either 1080i29.97 or 480i29.97

Hope this helps!

[Thad_h]

Inno,

Can you give me specifics of ALL your capture settings on these long capture tests? Also what is your source, and what are your system specs?

T