[Steve Swersky]

Thanks for the advice but if I were you I would check your settings because this works 100% correctly..I have smart slates and the tc window tests to verify…EVERYTHING is in perfect sync.

[Steve Swersky]

Thanks for the advice but if I were you I would check your settings because this works 100% correctly..I have smart slates and the tc window tests to verify…EVERYTHING is in perfect sync.

[Steve Swersky]

CHECK MY POST ABOVE FOR THE WORKAROUND FOR THE SYNC PROBLEM

[Steve Swersky]

Your audio sync problem is related to a capture problem with Kona and FCP and Tiger…There is a workaround!!!
Unfortunately you can not batch capture but you can capture each clip as it is logged and the audio will be in sync..I am currently working on an HD movie shot at 23.98..I have successfully captured 800 clips so far…ALSO..I changed my device control offset to -3 (AJA swears that is should be -2.5 but I checked and their -2.5 offset will leace a 1 frame discrepancy between the tape TC and what FCP thinks the TC is…Other than this capture problem The KONA 2 seems to work in Tiger with FCP studio…Hope this helps your capture problem

[Steve Swersky]

No..I was not doing anything but Batch capturing..I am running Driver 1.1.1 as told to me by aja..Just a note..the files are off by 3 frames (audio sync) when captured..The actual QT file is wrong..not just playback from FCP…ARGH..I think this might be a deck issue..I am using a sony J-H3..but am trying to get a SR deck to test with. Will keep all informed..Thanks