Shaun Roemich
Forum Replies Created
-
– Everything you suggest about the HyperDecks
– Dissolvable aux sends (on existing hardware if possible)
– DVI-I (supporting analog as well as digital) to HD-SDI with scaler to 720P and 1080i/pBig Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
Unless I’m mistaken, the BMIP won’t send HDCP info to the XBox to complete the handshake over hdmi. I know my ATEM switcher won’t.
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
Don’t need a serial number. Go to the bottom of the page and click the balloon that says “Download Now”
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
Quite fair, Andreas. Apparently I missed your previous comment to that effect.
Unfortunately, one of my character flaws is a belief in Occam’s Razor
https://en.wikipedia.org/wiki/Occam‘s_razor
and therefore it was EASIER for me to believe that the OP had in error listed the audio as running slow, instead of the far more common issue of the video being delayed.
I apologize for my “arrogance” in that regard and hope it is something as simple as requiring the newest firmware.
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
Given the path described, it is virtually IMPOSSIBLE that the video is too fast. Likely that the audio is too fast and needs to be delayed.
There is nothing in that path that would cause the audio to be delayed at all, whereas I would expect 2 to 3 frames delay of video.
Unless I’m missing something, but that setup isn’t much different than mine.
One cannot “speed up” audio obviously.
To have audio SLOW 6 frames, you are talking about a delay between the wireless, audio mixer and ATEM of approximately:
100ms if 60P, 200ms if 30P/60i.
I don’t see how that could possibly happen.
And that is BEFORE taking into consideration the delay caused by using the frame sync’s on the ATEM instead of genlocked sources.
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
Thanks for the correction, Mike.
For some reason when I was looking for delays for my ATEM, I went looking at Behringer and only the FBQ100 worked for me.
Perhaps it was because the the DEQ2496 “only” has 300ms of delay that I was afraid it wan’t flexible enough for me (~20 frames of delay at 60P, ~10 frames at 30P/60i).
In hindsight, my delays are running at 34ms right now so I would have been fine.
Thanks for the catch and correction. Wish I would have bought that instead now. 1RU instead of 1.5RU for the Sharks…
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
I don’t believe the linked Behringer does Line Delay.
The Behringer SHARK FBQ100 does.
I believe the linked device is the solution for digital audio for the ATEM TV Studio.
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
You’ll need a file format that supports transparency, like TIFF.
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
I would assume so. They have been quietly shipping them since late last year and just shipped another SMALL run on the 23rd (which unfortunately did not include mine).
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com -
Much appreciated Mr. Burston!
I wait with bated breath, especially given the “reviews” above.
Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com