Replies – Forums – Shaun Roemich – Page 3

Forum Replies Created

Page 3 of 8

← 1 2 3 4 … 8 →

Shaun Roemich
July 3, 2012 at 7:08 am in reply to: Wireless Cameras?

Colour phase and/or tearing is common in wireless video even at the professional/broadcast level as is macro blocking in solid colours.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
July 3, 2012 at 7:05 am in reply to: Wireless Cameras?

I’ve never seen wireless video with no noticeable quality loss. ACCEPTABLE quality loss is a far more accurate term. And remember, there is significant delay in wireless video, especially if cut against wired (and ESPECIALLY genlocked) video sources.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 30, 2012 at 9:11 pm in reply to: will 50 frame recording be possible with the HyperDeck Shuttle 2

I see the Pro does not… My bad. The studio does via a coaxial round DC connector.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 30, 2012 at 3:23 pm in reply to: will 50 frame recording be possible with the HyperDeck Shuttle 2

Input on the unit is looking for 12v. Has anyone tried running it off of a battery yet?

Power supply is a universal power to 12v transformer.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 27, 2012 at 3:53 pm in reply to: Can anyone VERIFY that the BMD HD-SDI Distribution Amp and/or VideoHubs pass embedded audio after an ATEM 1ME?

Thanks for the input, Baz. The DA wasn’t an Ensemble either. Now this has turned into a mystery for me…

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 22, 2012 at 4:07 pm in reply to: will 50 frame recording be possible with the HyperDeck Shuttle 2

Considering what your other options are, I’d say the HyperDeck Studio Pro is VERY portable… Just not a top-of-camera solution. 19″ wide (nominally), less than two inches high and about three or for inches deep and weighs maybe three pounds with two SSDs in it.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 21, 2012 at 3:17 am in reply to: ATEM software/firmware released this week… website lists performance enhancements

Wow… That was one of my least understandable posts ever… Next time, coffee before posting…

The website doesn’t LIST performance enhancements… It says performance enhancements (not specified) are the reason for the update, not new features.

Clear as mud now?

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 18, 2012 at 5:58 pm in reply to: Is anyone successfully using the ATEM 1ME control surface on an ATEM 2ME switcher?

Thanks so much for your response, Juan!

I was under the impression that EACH M/E buss had 4 upstream keyers. Good to know that isn’t correct.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 17, 2012 at 5:21 pm in reply to: Can anyone VERIFY that the BMD HD-SDI Distribution Amp and/or VideoHubs pass embedded audio after an ATEM 1ME?

Thanks folks. The DA wasn’t a Miranda either.

I did a google image search yesterday and in 20 pages didn’t find any that looked like the one in question… Just the “usual suspects”: BMD, Kramer, Extron, Gefen and the like.

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com
Shaun Roemich
June 16, 2012 at 7:59 pm in reply to: Can anyone VERIFY that the BMD HD-SDI Distribution Amp and/or VideoHubs pass embedded audio after an ATEM 1ME?

The DA was NOT a Gefen either… FYI (Only blue-ish product I could think of)

Big Dog – Technical Director – Switcher
Road Dog Media – Vancouver, BC Canada
roaddogmedia@gmail.com

Page 3 of 8

← 1 2 3 4 … 8 →