Seth Tours
Forum Replies Created
-
The EX3 will work with SD or HD Ref. However, SD ref won’t work while shooting in 24fps. For that, you’ll need a tri-level sync generator.
Seth
-
For the HD-SDI signal from the camera, use solid core 75Ohm coax cable.
Timecode is an audio signal. For long timecode runs, use XLR balanced audio cables.
For genlock you can use any 75Ohm coax cable.
I DO NOT reccomend looping timecode or genlock. 1 bad cable or camera can kill your whole shoot!
-
You can do 1280×720 on a pres pro. That is a 16:9 resolution.
-
David,
The tripple head will work with the X20, but you will have to use 3 inputs / layers to do it.
It may be easier to just run the Mac tower directly in to the X20 via a Dual Link DVI cable. The X20 is able to take an input 2450 pixels wide via dual link dvi.
Seth Tours
-
Sounds like you need one of these.
I have had a lot of success with them. The built in multi view generator and dvi input is super helpful.
Hope that helps,
Seth -
Have you looked at the Matrox Tripple Head to Go?
It’s cheaper that a lot of the high end multi head cards.
You can drive 3 separate displays from 1 powerpoint presentation.
https://www.matrox.com/graphics/en/products/gxm/th2go/
Hope that helps,
Seth -
Miki,
We don’t use computers to playback digital signage for long periods of time if we can help it. Too many things that can go wrong and break / overheat / whatever else.
We have been using these BightSign boxes for a while with a lot of success.
https://www.brightsign.biz/products/hd210.php
I like them because they are solid state. No moving parts. They also resume the presentation automatically after restart.
Hope that helps,
Seth