Replies – Forums – Ronny Nuyens

Forum Replies Created

Ronny Nuyens
September 27, 2015 at 6:55 pm in reply to: mono plays as stereo

Actually, if you look at it that way, it kind of makes sense. Tnx again Tim!
Ronny Nuyens
September 26, 2015 at 7:18 pm in reply to: mono plays as stereo

Hey Tim, thank you for your response. So by default, even a mono clip plays on both channels? I find this so difficult to grasp, I looked up some tutorials, but they even make me more confused :-/
Ronny Nuyens
November 18, 2013 at 11:05 am in reply to: Audio drops on one side

I know, but the thing is, when I open a new project, adjust the project settings to 44.100 and bring in one single clip (of 44.100) the problem still remains… not so with another clip I bring in (of 48.000 in a 44.100 project), the 48.000 one acts normal.
Anyway, it’s more or less solved, thank you for your time Dave.
Ronny Nuyens
November 18, 2013 at 2:11 am in reply to: Audio drops on one side

I kind of solved the problem. When I convert the wav files to 48.000 khz before bringing them in, everything works like a charm!
I still don’t understand why it doesn’t work with 44.100 khz files.
Ronny Nuyens
November 18, 2013 at 12:24 am in reply to: Audio drops on one side

I think I am getting on the right track here…
It doesn’t affect stereo, 48.000khz, 16 bit.
It seems it only affects the mono files (makes sense), 44.100khz, 24 bit, but then again, why do they play stereo if the level is at zero?
Ronny Nuyens
November 18, 2013 at 12:06 am in reply to: Audio drops on one side

Thanks for your reply Dave, they are just normal wav files that come with a program called Trailer Voice from Sonokinetic. I have never had any problems with it, neither with other sound in After Effects.
Maybe it has something to do with the audio driver on my system?
The problem appears the moment I change the audio level, when I put the level back to zero, the problem disappears… very weird.
It seems it only appears during RAM preview, because when I render the composition it plays fine.
Ronny Nuyens
February 24, 2011 at 8:55 pm in reply to: using decimal point

Hi Kevin, you’re right, I found the solution. It seems that, depending on which keyboard language you choose, the point on the numeric keypad acts as a comma, or acts as a point. So in my case I had to switch from a United States layout to a Dutch, which is almost the same, except for the point.

Thank you for your time

Ronny
Ronny Nuyens
February 24, 2011 at 10:52 am in reply to: using decimal point

Thanks for your response Joey. I see what you mean, but every time I type a number like “one and a half” I’ll keep typing “1.5” instead of “1,5”. But if that’s just the way it is, no problem, I just thougt it was a setting somewhere.
Thanks again,
Ronny