Replies – Forums – Ron Humer – Page 4

Forum Replies Created

Page 4 of 5

← 1 … 3 4 5 →

Ron Humer
April 2, 2007 at 6:16 pm in reply to: Flow and COW… need your help…HD issue…

I just ran a HDsdi test into a Kona LHe with final cut and the signal is coming in fine, so I think the deck/cable are ok. And just ran the m100 test and the test passed. I would like to use m100 for it’s ease of use and compression….

Let me know your thoughts.
Ron
Ron Humer
April 2, 2007 at 6:06 pm in reply to: Flow and COW… need your help…HD issue…

I specs for the deck are HD sdi (SDI 1.485 Gbps -conforms t SMPTE 292M/BTA-S004B) . There is nothing in the manual that says anything about dual link. And yes the tape being dig’d is 29.97.

The pins are not bent. Also confirm that not all pins are present for the full connection…. a portion to the right of the connector are empty.

Do I go out to buy another bnc cable? Searching on the internet markertek has RG59 bnc cables…. are there standards between bnc cables?

thanks again for your help.

Ron
Ron Humer
April 2, 2007 at 5:37 pm in reply to: Flow and COW… need your help…HD issue…

Also as a test, I ran a sdi cable from the deck’s SD-SDI conv. out to SD SDI in on m100hd and I can see the signal fine. Now even though it’s recording it 1080i, the quality is significantly less right?

thanks again.
Ron
Ron Humer
April 2, 2007 at 5:29 pm in reply to: Flow and COW… need your help…HD issue…

Yes. HDsdi. Yes. tried 3 different make of bnc cables. Are there bnc’s for HD?

Thanks for working this out with me.

Ron
Ron Humer
March 7, 2007 at 9:01 pm in reply to: need to redig clips only,not whole orig media- Is it possible?

I figured it out but just to clarify ….the sequence was based on one 2 hour movies….. and there was 12 hours of total films dig’d.

thanks for your response….

Ron
Ron Humer
March 7, 2007 at 8:17 pm in reply to: Need to redig clips only,not whole orig media- Is it possible?

Someone just told me you have to highlight the delete items in the media manager when setting up a new project…. guess it’s possible.
Ron Humer
March 6, 2007 at 10:44 pm in reply to: Best codec for offline to see on a monitor with Aja LHe ?

Never mind… it was on 10bit setting when it should have been 8 bit setting….
Ron Humer
January 25, 2007 at 4:21 pm in reply to: Barn Doors FX…

thanks…
Ron Humer
July 15, 2006 at 7:40 pm in reply to: OMF Exchange for Media 100

my 2 cents…..

Was pleasantly surprised to hear that the OMF Exchange existed….. bought it immediately and has worked 6 out of 6 times so far…. the file size of the omf is determined by original size of the digitized sound source…. so we have redigitize (2 hour movies) with 3 second handles in the hirez process to then ftp to sound facilities.

Had to work on 8.2 with omf until this latest release… thank goodness.

Best,
Ron
editology

Editology
“2006 Winner- Promax Gold for Showtime Networks”
Editology.com
Ron Humer
March 16, 2006 at 4:14 am in reply to: Media 100HD & RAM

Good news indeed….

Mr. Sheeplove…. 2.6 terra RAID? Does that do uncpsd HD? Looking for a HD-HD solution for the m100hd.

Page 4 of 5

← 1 … 3 4 5 →