[Rob Lalonde]

Are you roundtripping the motn project?
Sometimes, but not all the time…

Are your Motion/FCP project settings the same (resolution/frame rate)?
Yes, but sometimes I bring in 720/30p and scale it to the SD project.
It happens with stills as well though.

Are you using cohesive versions FCP 6, Motion 3? Done all your Pro App updates?
Yes

Try creating a slug in FCP, same time duration as your current motn clip, send to motn project, copy your layers from the original motn project into the new “roundtripped” project, save, and see if that works…
I’d just re-boot to try and get it back before I’d do this, it really doesn’t solve anything.

If it still gives you issues, consider exporting Animation + Lossless from Motion and import into FCP
But, this defeats the purpose and doesn’t help fix the problem.

Have a good one,
Rob LaLonde
Rec and Tek Media, Inc.

[Rob Lalonde]

I don’t know the setting location off the top of my head, but make sure in the menu, the video output is set to “live” instead of “Recording”.

Have a good one,
Rob LaLonde
Rec and Tek Media, Inc.

[Rob Lalonde]

I used a similar setup with a Kona 2 and used a Yamaha 01V96 V2 Digital Mixer and took the AES from the BOB to the board and used an analog channel out to each speaker. You will have to assign some busses and stuff in the board as well as set the channels from within FCP and off you go.

Hope this helps

Have a good one,
Rob LaLonde
Rec and Tek Media, Inc.