Rob Burkhardt
Forum Replies Created
-
I just wanted to give everybody an up date on my GoPro HDMI to SDI converter issues. I finally got it to work with the AJA converter box, but it has to be the last thing turned on in the chain and it will not transmit on wifi and output to HDMI at the same time, and it has to be turned on last. I was using the wifi to view set up of the various frame rates and check my picture.
That means you can check your setup with either HDMI or wifi, but you have to shut off the camera and tuyrn it back on with wifi disabled for the AJA to lock to it.
I had a brief signal with the BMD devices but had to return them before I could do any more trouble shooting so this may be the same issue.
And I tried a hero3 white addition and couldn’t lock to it but the cameras wifi was turned on. -
In the end the problem was when I used Marks Bit Rate I didn’t plug in a safety percentage. The Falcon media worked fine the Primera people had no objections to using it. My biggest problem is with the windows OS it has never been stable for me; it doesn’t matter which version.
-
One other question; is it necessary to do a 2 pass render when mastering a DL disk? I always have but what is the real difference in quality?
-
I did a test with last years project same length the falcon media worked fine. I will go back to Verbatim if I get excessive rejects. I ended up reloading Vegas9 and the updates. I think there was a problem in the set up of the DVD rendering, before re-installing one of the switches was at progressive not lower field first. the test worked fine will let you know tomorrow if full video doesn’t work.
Thanks
-
Steve
I Use Marks Bit Rate calculator to find the bit rate for a dual layer DVD, then set up V9 to render MainConcept mepeg2, setting the out put type to mepeg-2 and a variable bit rate specified by MBRc and 2pass. I don’t think I changed any thing in advanced video but I can’t tell. Include audio stream is unchecked. Save elementary as separate streams is checked. project is set to best.
This worked fine on a test DVD but after I changed a marker point in Vegas and re-rendered the Bravo pro puts the disk in the drive and spits it out with out doing anything to it, I have tried another project in memory and it duplicates. I am using Falcon media DVD+R DL 8x 8.5 GB media. -
Thanks Mike. You always have the answers for me.