Replies – Forums – Richard Jett

Forum Replies Created

Richard Jett
March 2, 2014 at 4:30 am in reply to: GH3 Audio Input & External Mics – Wiring, Impedance… Incompetence?

Hey Ty, I think that might do it. Thanks so much. Richard Jett
Richard Jett
March 2, 2014 at 3:13 am in reply to: GH3 Audio Input & External Mics – Wiring, Impedance… Incompetence?

I am using the h4 to record the two lav,s and to also send a good quality stereo signal to the camera.
Richard Jett
March 2, 2014 at 1:52 am in reply to: GH3 Audio Input & External Mics – Wiring, Impedance… Incompetence?

I will be connecting to lav,s to the H4n.
Richard Jett
March 1, 2014 at 11:48 pm in reply to: GH3 Audio Input & External Mics – Wiring, Impedance… Incompetence?

Hi Ty,

Thanks for the welcome and jumping here with the newbe.

I was reading a thread on using a Transcam field recorder as a mixer for a HDSLR. The post did not mention on how to get to the camera. My assumption was that the he must of taken a line out feed and inserted a pad between the connections.

I have a Panasonic HDSLR GH3. And I am using the Zoom h4n. So I tried this and, yes, there must be pad put between the line out and the mic in on the camera. My question in my post was where do you find a male mini to male min line with a 30 (20?) db pad.

Thanks Ty, Richard Jett
Richard Jett
March 1, 2014 at 1:38 am in reply to: GH3 Audio Input & External Mics – Wiring, Impedance… Incompetence?

Guy,
I am trying a audio setup with the Zoom H4n and the GH3. Line out from the zoom to camera mic in but I need a pad. Do you know of a cable that has one?
Thanks RJ
Richard Jett
May 23, 2012 at 8:03 pm in reply to: Mini HDMI to headphone adapter

This is a DIY for a Cannon AV audio out fix, should work for GH2. Check it out:https://www.youtube.com/watch?feature=player_embedded&v=puNlqQIBdN8

Jett