[Oliver Gwyther]

Hi Tim,

I’m not sure what settings he used. I’m going to collect the Digi later and i’m going to check out his setup in detail.

I’ll keep you updated.

Regards,

[Oliver Gwyther]

Hi Tim,

Thanks for your reply.

I suspected the same thing with regards to the deck getting up to speed, but that does not seem to be the case. It doesn’t matter if i put a 10second or 10 minute delay on it, it will always start late.

I have had the deck checked and there are no problems at all apparently. The engineer even succeeded in recording to tape with a Blackmagic system.

UPDATE: After speaking with AJA, they can’t advise me any further on the problem with the deck not recording. However, they have informed that the bug with AE is a known one and will be fixed in the next release.

[Oliver Gwyther]

Hi Tim,

Thanks for your reply.

I suspected the same thing with regards to the deck getting up to speed, but that does not seem to be the case. It doesn’t matter if i put a 10second or 10 minute delay on it, it will always start late.

I have had the deck checked and there are no problems at all apparently. The engineer even succeeded in recording to tape with a Blackmagic system.

On a more positive note, AJA have now responded to my query and i am dealing with them directly – hopefully they can provide some more insight into the problem.

Regards,

[Oliver Gwyther]

Hi John,

After Effects CS3 is actually incapable of using more than 4gb under any system.

You can find information on how to allow it to use more than 2gb in the comments section of the following help article.

https://livedocs.adobe.com/en_US/AfterEffects/8.0/help.html?content=WS9F936D13-E76A-41e4-BF8F-577132AB4723.html

If that doesn’t help you, there are also numerous articles on Google. Just search for “using more than 2gb of RAM in after effects”, or something similar.

Regards,