[Mirela Bogdan]

Thank you, Chris.

[Mirela Bogdan]

Thank you very much Ben 🙂

[Mirela Bogdan]

D’oh!
Thank you, Stefan 🙂 …

[Mirela Bogdan]

Thank you Bret, will try this out.

going a little off topic… do you know much about digibeta tapes? 🙂 sorry, not the most techy person…still learning my way around loads of stuff…

thanks

Mirela

[Mirela Bogdan]

Thanks for the advice.

I know it’s knot the best option – I wouldn’t normally go for it either. Still, got to make things work somehow, so if I were to stretch each frame, what’s the best way to go about it? If I were to use the Distort option in the Viewer what kind of measurements would you recommend?

thanks

Mirela

[Mirela Bogdan]

Thanks Tom, and sorry for the hassle.

Mirela

[Mirela Bogdan]

Hi Tom,

thanks for the advice. I’ve tried downloading CGM Aged Film LE v2.5.7 but when I do so I get an error message. Also, the download time is very, very short. Is that normal?

Kind Regards,
Mirela

[Mirela Bogdan]

Hi Tom,

thanks for your reply. Regarding your questions about settings etc…

the camera is a mini DV
set up: 12bit audio – ST1
Audio out – Stereo
Display – On
Remote – VCR1
LCD A1 – Dynamic
LDC Set – NO
EVF SET -NO
USB Function – Motion DV
Advanced: Rec data – On
Pict Qual – high picture quality
Repeat play – Off

Shutter – automatic
wide noise reduction

Settings used to capture:
noticed that the audio capture in System settings – scratch disk – is ticked but greyed out the rest of the boxes are all ticked in VC VR and AR (339.0GB on Macintosh HD). As for the Playback Control – RT is safe, VQual is dynamic Frame rate is Full and tick on beep when playing unrendered audio , record – full quality

data I captured has the following:
vid rate 25fps
frame size: 720×576
data rate: 3.6 MB/sec
Audio rate: 48.o KHZ
field domain – Lower (even)
composite – normal
alpha – none/ignore

And the out of sync is visible in the viewer

Hope this is all the info you needed.

many thanks for any help and feedback on this

Mirela

[Mirela Bogdan]

Hi David,

I hope it’s ok for me to join this post. I am also having sync troubles..
I’ve tried different things such as moving into sync (for some reason I don’t get the option of mark in sync (it’s greyed out)) and then thought about changing the frame offset to 0 like you advised but I do not have that option ( is it because I use Final Cut Express 4?!). Any suggestions? I’m quite new to this and still learning my way around, however this is the first time I have issues with the sync and don’t remember changing any of the settings on my camera (nothing special, just a Panasonic NV-GS180 (2.3 megapixel – 3CCD… but it has served pretty well thus far) or computer (iMac 24″/3.06GHZ/2GB/500GB/SD/AP/BT).

will be grateful for any suggestion on this

thanks

Mirela

[Mirela Bogdan]

Hi Tom,

Thanks for your reply. Regarding the system I have etc… I own an iMac (24″ /3.06GHZ/2GB/500GB/SD/AP/BT) and Final Cut Express 4. The camera I use is a Panasonic NV-GS180EB (2.3 mega pixel) (still picture recording). I’ve imported footage before using a firewire cable and never had any issues with the sync, and I do not remember making any changes to the settings on my camera or FCE. I was wondering if there is a way I can fix things without having to re-import footage… Still learning my way around FC as I did a short course on it last year..

Mirela