Kevin Lowe
Forum Replies Created
-
Yes it is
-
So now i’ve done it all.. replaced the camera with a new one, changed the cable, and still FCPX does not detect the camera. Is there a setting that i have to set on this HVX200A to make the computer detect it
-
So i decided to assume that it was the port on the camera that was bad because the port on my iMac was working fine with another device, and I got my camera replaced with a brand new one. Opened FCPX and nothing happened, opened FCP 6 tried the log and capture and it still said “unable to initialize video deck,” So now im assuming that it may be the cable so im left to get that replaced now
-
nope, BTW when you connected you HVX are you using the same cable as me(1394 to FW800). and if so, does FCPX automatically detects you camera when you click the “import from camera”?
-
I have an iMac that only has the FW 800 input and I am not using an adapter. I’m using a 1394 end cable to a FW 800. I was doing some research from different places and some were suggesting that it’s possible to have fried the FW port but I tried the port with my audio interface and it worked regularly. I highly doubt that the 1394 port on the camera got burnt but there is no way for me to tell at the point. I also read that you should turn the camera off before unplugging or plugging in … I did not do this instead the camera was on when I plugged in the FW to the iMac but it was working fine with FCP 6 but FCPX is not detecting and I don’t know why and now neither is detecting the camera
-
I am recording to Tape and connected via FW 800