Replies – Forums – Jud Archer – Page 2

Forum Replies Created

Page 2 of 2

← 1 2

Jud Archer
May 22, 2014 at 7:09 pm in reply to: Premiere Pro CC workspace not showing on second monitor

Ditto here. I don’t know how you figured it out… and if there is a culprit program that changed that setting… but thanks!

Jud Archer
Apple Systems Integrator
Jud Archer
March 31, 2014 at 8:33 pm in reply to: HyperDeck Studio TimeCode issues with Premier CC

Thanks Chad. As I said in the original post “HyperDeck jog wheel menu set to >TimeCode >Incoming”. And I think the key words are “SHOULD” be working.

-We have done a straight dub from a Sony tape machine with SDI embedded Time Code and the HyperDeck works.

-We have eliminated all the routing, patching etc. and done a straight run from edit machine out to HyperDeck and doesn’t work. Won’t even see the XLR version of Time Code.

So let’s throw this in the mix:

Since we know HyperDeck is working with a tape deck transfer I’m backing up and thinking the problem is in the source feed, i.e.. the edit machine playback. 3 machines are running various flavors of Premier or Avid with DeckLink PCIe or Thunderbolt Decklink 4K. Timecode had been a known problem in the past with DeckLink cards/boxes in the past but was fixed around firmware version 9.3.something. Installed version 10.0 firmware for the Decklinks and like with most everybody on the planet it trashed the system. SO… rolled firmware back to 9.3.3 and all is well except this timecode doesn’t seem to be spitting out of the Decklinks.

Might be time to start a new thread for Decklinks and TimeCode out??

Jud Archer
Apple Systems Integrator
Jud Archer
January 17, 2007 at 11:28 pm in reply to: 2GB RAM limits Decklink Extreme PCIe

Thanks for the response. I have 6 FinalCut installations and am migrating them all to the Intel. I have the SD cards in all of them. Is a fix coming anytime soon or do I just need to plan on migrating the SD cards to HD?

Jud Archer
Systems Integrator
Jud Archer
January 17, 2007 at 7:56 pm in reply to: Stupid question

Does this apply to the HD cards as well or is it limited to the Standard Def cards?

Thanks

Jud Archer
Systems Integrator
Jud Archer
January 17, 2007 at 5:40 pm in reply to: 2GB RAM limits Decklink Extreme PCIe

I heard rumor of that and have looked hard in the decklink materials but never found that statement.

-Is this true for Mac too or only Windows.
-Does the same rule apply to the HD Decklink Extreme.
-If it will be fixed in future drivers is that “soon” or just “sometime”. I need to be up & running “soon”.

Sorry to ask so many questions but I have not been able locate this information in the Decklink materials.

Jud Archer
Systems Integrator

Page 2 of 2

← 1 2