Hi Guys,
I ran across this message when searching for panasonic stuff in google.
I have had the same problem with the AJ-HD150 and FCP with decklink cards.
At Leo Ticheli Productions we are just taking the AES lines to the HD150. They have not needed to do any multi- channel HD stuff yet.
However, I do believe this is a flaw in the electronic or firmware design in the 150 not the decklink card. Because I’ve seen reports of the same thing happening on an AvidDS Nitris system.(https://www.avid.com/onlineSupport/supportcontent.asp?contentID=8195)
In my tests I have found that changing BM drivers did not solve the problem. I have even talked to an engineer at Panasonic about the problem. As usual they were trying to blame the other companies and bypass any possibility that they had a problem.
The embedded audio does work on the 150 if you have an HD 130 as a direct source. I have done that test.
I’m still waiting for Panasonic to come up with a solution.
Good luck,
Joe Renna
AvilaRose,Inc.
Chief Engineer
Leo Ticheli Productions