[John O’neil]

Steve

I will give it try the next time it happens. Today, the drive has been playing nicely with us – it must have known that I have written about it and decided to work

Thanks for the suggestion

Cheers

John

[John O’neil]

When we try any of the 5 slots the card does not appear.

Of course today, the drive is playing nicely so the next time it happens I will check Disk Utility to see if they are coming up there

Thanks for the suggestion

[John O’neil]

We have also been having this problem this morning and found a very intersesting “feature” in FCP 6.0.4.

If your window layout has the video scopes visable, in RT, there is a Playback Video Scopes option. If this is ticked, ETT will want to render. If it is not ticked, it does not want to render.

[John O’neil]

Shane

Thanks for the info

I can confirm that I see an image on a monitor connected to the deck. The video and audio input on the 1400 is HD SDI.

I have re-used the 1080i25 DVCPRO HD easy setup again this morning but the problem remains.

I suppose the interesting point of the problem is even if the suite is not patched to the deck the problem occurs. On my monitor, I have an 2 channels – one is the edit suite, the other is the output of the deck. The static occurs on both channels.

As soon as I cancel the edit to tape, the image re-appears.

Now one thing Im confused about. On A/V Device Settings, Playback for Video is AJA Kona 1080i25 8bit (1920 x 1080). This is also the same for Edit to Tape as I have not checked the Different settings check box on A/V Device Tab.

However, since the timeline is DVCPRO HD and the Deck is DVCPRO HD, shouldn’t the playout also be DVCPRO HD ?

I think Im missing something obvious here ?

Regards

[John O’neil]

Shane

Thanks for the info

I can confirm that I see an image on a monitor connected to the deck. The video and audio input on the 1400 is HD SDI.

I have re-used the 1080i25 DVCPRO HD easy setup again this morning but the problem remains.

I suppose the interesting point of the problem is even if the suite is not patched to the deck the problem occurs. On my monitor, I have an 2 channels – one is the edit suite, the other is the output of the deck. The static occurs on both channels.

As soon as I cancel the edit to tape, the image re-appears.

Now one thing Im confused about. On A/V Device Settings, Playback for Video is AJA Kona 1080i25 8bit (1920 x 1080). This is also the same for Edit to Tape as I have not checked the Different settings check box on A/V Device Tab.

However, since the timeline is DVCPRO HD and the Deck is DVCPRO HD, shouldn’t the playout also be DVCPRO HD ?

I think Im missing something obvious here ?

Regards

John