[Joe Somodi]

I hope below is the info you are looking for. I also have two external drives I use for larger projects. Both Lacie. One 500gig and the other 250gigs.

SCSI Bus:

ATA IC35L120AVVA07-0:

Capacity: 115.04 GB
Manufacturer: ATA
Model: IC35L120AVVA07-0
Revision:
Removable Media: No
Detachable Drive: No
BSD Name: disk3
OS9 Drivers: Yes
Target: 0
SCSI LUN: 0

2 Media:

Capacity: 115.04 GB
Available: 13.31 GB
Writable: Yes
File System: HFS+
BSD Name: disk3s9
Mount Point: /Volumes/2 Media

ATA IC35L120AVVA07-0:

Capacity: 115.04 GB
Manufacturer: ATA
Model: IC35L120AVVA07-0
Revision:
Removable Media: No
Detachable Drive: No
BSD Name: disk1
OS9 Drivers: Yes
Target: 1
SCSI LUN: 0

3 Media:

Capacity: 115.04 GB
Available: 17.43 GB
Writable: Yes
File System: HFS+
BSD Name: disk1s9
Mount Point: /Volumes/3 Media

ATA Maxtor 7Y250P0:

Capacity: 233.76 GB
Manufacturer: ATA
Model: Maxtor 7Y250P0
Revision:
Removable Media: No
Detachable Drive: No
BSD Name: disk2
OS9 Drivers: Yes
Target: 2
SCSI LUN: 0

Macintosh HD:

Capacity: 69.84 GB
Available: 31.23 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s10
Mount Point: /

Media 4:

Capacity: 163.67 GB
Available: 45.6 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk2s12
Mount Point: /Volumes/Media 4

Joe Somodi, Editor
Gryffen Productions
NYC

[Joe Somodi]

I’ve tried the audio mixdown and i’m not seeing any new results…

Joe Somodi, Editor
Gryffen Productions
NYC

[Joe Somodi]

I am running the G4, Duel 800, I have three extra media drives (IBM – 120gigs) and one external LACIE drive (150gigs). I have a scanner and a printer hooked up to the computer and out of the firewire I’m running the SONY DSR-11 deck. I’m really confused if it’s a config issue, since I’ve had this set up the same way for the past three + years – with few issues. I upgraded my RAM about a year ago and now have two new 512’s in their along with an original 512 (so three total) and since I’m totally lame I have no idea what the name of my firewire card is. (guide me to where i can find the name)

I will try lowering the RT audio to 2 and see what happens, but it seems to be a LARGER issue than a small adjustment b/c
1. it’s happening on a regular bases (and i edit almost every day)
2. for FCP to simply shut down while in a “print to video” mode seems highly irregular – and reads that the system is unstable…

I did upgrade my OS system recently to 10.3.9 and I did upgrade FCP recently to the HD version…this could have something to do w/ it?

your help is so appreicated

joe

Joe Somodi, Editor
Gryffen Productions
NYC

[Joe Somodi]

On top of FCP crashing on me, I am consistatly getting “dropped frames” message. (I posted an earlier message regarding this issue) I am aware of many of the things that one can do to avoided this dreaded error message:
– closed unused sequences
-trash pref
-not have any drive more than 90% full
– do a mixdown on audio
etc etc

I’ve even Rebuilt my permissions on my hard drive several times and this doesn’t seem to do any good.

I’m at a loss….

Any ideas?

Many thanks,

Joe Somodi, Editor
Gryffen Productions
NYC