Replies – Forums – Jake Musser

Forum Replies Created

Jake Musser
April 27, 2010 at 9:53 pm in reply to: J-3 Digibeta Audio

I can put the same tape in our J-30 and get analog audio…

I Have tried several tapes. Very strange…

Only thing I can think is the Digital to Analog Audio path is broken. The Audio meters in the menu move because they are digital..?
Jake Musser
April 27, 2010 at 9:02 pm in reply to: J-3 Digibeta Audio

Thanks for the Reply.

I can see the audio levels on 1/2 move, but can’t here on the Analog out during Digibeta playback.

Could be a broken signal converter in the deck Dig-Ana Audio…?
Jake Musser
April 27, 2010 at 8:15 pm in reply to: J-3 Digibeta Audio

I do not see any menu setting to change output channels..

At this point I am to believe it is a broken Digital to Analog Audio path in the deck…
Jake Musser
April 27, 2010 at 6:40 pm in reply to: J-3 Digibeta Audio

I will double check the menu, but don’t believe i have any options in the menu on this deck (the j30 has a ilink menu 831 to monitor the DV conector)

I can switch audio channels on the front panel using the, AU MON SEL, and have audio meters in ch 1,2 but nothing sound out of headphone jack, or XLR…
Jake Musser
April 27, 2010 at 5:57 am in reply to: DigiBeta Deck for FCP

Question regarding Digibeta Audio playback on J3..

Does Digibeta Audio only output on the embedded SDI channel? I see audio meters but do not hear over headphone jack or XLR monitors. BetaSP works fine..

Our J-30 deck plays digibeta audio on headphones and XLR out… Was that an improvement on the J-30? Or is our J3 have an issue??

Thanks!
Jake Musser
May 14, 2008 at 5:14 pm in reply to: Multiscreener – a Mac-based freeware

I would like to play 19 unique synced QT sources. Will this software allow that? How many clients will be needed? I would like to play QT with window size 720×404, and was thinking of putting 3 per 30″ cinema display +- 6 monitors.

Input appreciated.