Replies – Forums – Greg Davis

Forum Replies Created

Greg Davis
August 16, 2013 at 4:18 pm in reply to: SLOWWWWWWWWW Exports

Results from Speed Test are:

Based on 5gig load test

413.3 Write
347.0 Read
The results fluctuate up to 20 megs on average higher for both.

NO errors in the Promise utility.
Greg Davis
August 16, 2013 at 3:58 pm in reply to: SLOWWWWWWWWW Exports

Rendering is slow as well, but mostly during the export.
Greg Davis
August 16, 2013 at 3:57 pm in reply to: SLOWWWWWWWWW Exports

Usually I export to The Apple Compressor setting HD 1080p, but I also use the master setting and it is still painfully slow. As far as graphics, doesn’t seem to affect time much, at most I have lower thirds (maybe 3 or four) and animated intro that I attach that is a .mov. All of my projects end up going on youtube or our DIstrict Website, so ending file size needs to be around 2 gigs.
Greg Davis
January 7, 2013 at 8:15 pm in reply to: Phantom Text

That is exactly what I was looking for. Thanks for advice. I have been self taught, so I still have a lot to learn.
Thanks,
Greg
Greg Davis
February 28, 2012 at 4:11 pm in reply to: Panasonic HS400, Black Graphics, and DSK

Do you mean physical fed two different signals, or some how with the file it’s self. On the Panasonic HS 400, I have turned on Matt but it just gives a colored matt. Do I need to add a physical input the the switcher?
Greg Davis
February 28, 2012 at 3:21 pm in reply to: Panasonic HS400, Black Graphics, and DSK

Here are a couple of pics of what it is doing on screen. ANy ideas would be greatly appreciated.

Thanks
Greg Davis
February 27, 2012 at 10:17 pm in reply to: Panisonic HS400, DSK, and Black graphics

Still not fully keying in the graphic. Please let me know of any suggestions.

Thanks
Greg Davis
February 24, 2012 at 6:20 pm in reply to: Black Lower Thirds & down stream keying

Changing that did help, some of the black did come back, but some of the black is keying out. I am exporting from motion 5 and running the QT video thru (On the Air Video) and into my switcher (Panisonic HS400). It my be a setting in my switcher. When I create graphics in On the Air CG. It also keys out everthing black. Please let me know any suggestions you have.