Forum Replies Created

  • Chuck Moss

    March 17, 2006 at 4:50 pm in reply to: Convert 720p 23.98 to 1080i 59.94 with Kona 2

    Thanks Jeremy,

    I had a feeling that 59.94 was identical to 29.97, but I could not find any conclusive evidence on the internet. I have all the other hardware I need. I have set up a 8 drive sata raid with the sonnet x-8 card. It has been working very well for me so far. I get about 450 mb/s read and write with a half full raid.

    Is there a good intnete dtabase or information web site that I should use as a reference for these little distictions like 1080i 59.94 is the same at 1080i 29.97…..

    On another note where can I find the 4.4.4 RGB codec. It does not seem to have been installed on FCP when I installed the latest version of the aja software package?

  • Chuck Moss

    March 17, 2006 at 3:01 pm in reply to: Convert 720p 23.98 to 1080i 59.94 with Kona 2

    Thanks David For the info,

    I had a feeling that I would trancode 720p to 1080i on a quicktime timeline. I and happy to hear that quicktime does a good job of this, but I still have another qurestion.

    How about sending out 1080i 59.94? Can the Kona card send out this formate for mastering? It is not one of the fram rate that the card is advertised to work with in 1080i. Se Below the teck specs from the AJA web site. Has anyone had luck send 1080i 59.94 out to a HDCAM deck with teh Kona 2 Card?

    KONA 2 Specifications
    Video Input
    HD-SDI/SDI, SMPTE-259/292/296
    Dual-link HD 4:4:4
    Dual-rate
    Video Formats
    525i 29.97
    625i 25
    720p 59.94
    720p 60
    1080i 25
    1080i 29.97
    1080i 50
    1080psf 23.98
    1080psf 24
    Video Output
    Digital:
    SD-SDI, SMPTE, 259M, 10-bits, BNC
    HD-SDI SMPTE, 292/296, 10-bits, BNC
    Dual-link HD 4:4:4
    Analog:SD and HD Output, 12-bits, BNC
    HD: YPbPr, RGB
    SD: YPbPr, RGB (component mode)
    Composite/YC (composite modeKONA LS Specifications
    Video Input
    Digital: 8or 10-bit SDI, SMPTE-259

  • Hey Luke,

    I gather from the posts that the bridge card will not be out for at least one to two months, but is the multibridge extreme going to ship soon?

    Also on the subject of the bridge card, will there be any ruduced performance out of the multibridge extreem if you are useing the PCI-X to PCI-e bridge card instead of a direct PCI-e connection. Does the 133 or 100 mhz PCI-X slots deliver enough bandwith?

    Chuck

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy