[Christo Johnson]

Hi chris,
No, the limit capture length is not set to any specific amount of time. I did figure out how to get the clips to go into the browser intact. I took forever as sometimes clips would appear and then I would have to Capture all over again till no clips were formed. They were however all cut up in my capture scratch folder which required a little mending so I could re-connect media in my project.
Does this sound like anything you have encountered before?

Christo Johnson
iMac OS X V 10.6.3
2.66GHz Intel Core i5
4GB 1067 MHz DDR3
FCP 7
Seagate Freeagent 2TB desktop HD x 2

[Christo Johnson]

Sorry for the delay. I was out of reach.
Thanks for your response. Gonna try your suggestion now.
-Christo

Christo Johnson
iMac OS X V 10.6.3
2.66GHz Intel Core i5
4GB 1067 MHz DDR3
FCP 7
Seagate Freeagent 2TB desktop HD x 2

[Christo Johnson]

“That is a non RT video resolution. If you cropped it to 1280×720 it would be much better but that is a progressive size.” ???????

What are you telling me? I know the camera shoots in progressive mode. How do I crop? Even if I crop, the clip settings will remain the same, no? Image wire frame? What should I set my sequence settings at as this aspect ratio is not an option? I have been opening new projects and discarding the sequence, going to easy setup, setting up and dropping the clips into the TL. as soon as I do this, The RT settings Change and there is no longer the full RT setting menu. I have been setting @ 1280×960 and choosing custom set up. What would you do. Also,I have been getting a renderline for audio but not video. I have tried to match audio settings to the sequence settings. I cant get further than 45 secs before I get a dropped frame warning. No effects at all. At the moment, I’m trying to re install FCP studio so we’ll see if this helps.

Christo Johnson
iMac OS X V 10.6.3
2.66GHz Intel Core i5
4GB 1067 MHz DDR3
FCP 7
Seagate Freeagent 2TB desktop HD x 2

[Christo Johnson]

I had been shooting tapeless The ilink was set to down convert HDV to DV from the MRU. I guess i really need to go over the MRU a bit harder. Anyway, thanks.

[Christo Johnson]

Thanks,
I figured this was the problem, just couldnt fix it on the camera. I’ll go through the manual again. thanks