Forum Replies Created

Page 2 of 5
  • Brad Froman

    October 25, 2011 at 9:06 pm in reply to: Can Aja output HD to Sony PVM L5 w/o Optional Card?

    That’s wonderful. I shall get to work with my L5 then. Thank you!

    Brad Froman
    Director/Cameraman
    Cool Blue Pictures
    Washington, DC

  • Brad Froman

    October 25, 2011 at 9:01 pm in reply to: Can Aja output HD to Sony PVM L5 w/o Optional Card?

    Well that just makes me very happy…not having to spend on an HD Monitor for color calibrations. I’ve had this L5 20″, plus I’ve got an L5 14″ and they’ve both been barely used sitting in boxes for a few years.

    So, by feeding the L5 with the Kona, is there any difference in the image compared to the L5 if it had the HD SDI input board?

    Brad Froman
    Director/Cameraman
    Cool Blue Pictures
    Washington, DC

  • Brad Froman

    October 21, 2011 at 12:35 pm in reply to: Washington DC Camera Rental?

    Thanks a bunch, Angelo. I’ll put you and Penn Camera in my book.

  • Brad Froman

    October 18, 2011 at 5:07 pm in reply to: Camera Rental in Washington DC?

    Awesome. Getting a package from DC-Camera. Thanks so much for the tip!

  • Brad Froman

    June 4, 2010 at 3:44 pm in reply to: Reality Show Cameras

    Cool. They are generating some great video that holds up through transmission. Thanks.

  • Brad Froman

    May 23, 2010 at 12:30 am in reply to: Sony UVW 1800 Component Input

    Yes, Bob, I was aware that the 1800 is not an HD deck. And I didn’t need a drink to figure that one out. I have resolved the issue. It was settings issues within the control panel as you suggested. What wasn’t making sense to me was that the component signal going to the analog monitor looked fine but sending it to the 1800 gave me nothing. So going round and round with the primary and secondary analog out on AJA eventually led me to trip over the right combination and Bingo, it all worked. Anyway, thanks so much for the tips. I’ll have to buy you a drink one day.

  • Brad Froman

    May 22, 2010 at 4:57 pm in reply to: Sony UVW 1800 Component Input

    The “Component (Beta)” setting is grayed out. Only “Component (SMPTE/EBU N10)” and “Component (RGB)” is available. Do you know how can get the “Component (Beta) option?

    And not sure if this has any bearing (since it feeds analog monitor fine), but the video format is set to the project: 1080i29.97.

  • Brad Froman

    April 15, 2010 at 8:56 pm in reply to: FCP plug in

    Well how do you like that? You’re right, that’s all I had to do. I didn’t realize it was adjustable. Thanks!

    I guess I just thought there was more of an issue since “Canon DSLR” was not listed, but “Canon E1” was there instead. But, what the heck, as long as it works as intended, right?

    Thanks again, Aaron.

  • I installed it right on top of factory 1.1 and it works just fine.

  • Brad Froman

    March 26, 2010 at 4:33 pm in reply to: 5DtoFCP for Firmware 2.04?

    Do you have an address for where the download is posted? Thanks.

Page 2 of 5

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy