Forum Replies Created

  • Bert

    March 13, 2006 at 2:59 pm in reply to: no input signal Decklink HD

    1- check that the fcp settings match those of the jH3 (25psf to 50i //29,97psf to 29,97 ..)
    don’t forget to match the deck-control with these settings.
    2- if the tape inserted into your jH3 is playing without a flashing frame-rate indicator, then your setting of the JH3 is correct.
    3- check in the Apple sys. pref. >> blackmagic the HD up/downconvert input should be OFF.
    4- enjoy HD editing …

    http://www.2frame.be

  • Bert

    August 3, 2005 at 6:54 pm in reply to: Timecode break using Blackmagic 1080i 59.94 JPEG

    Just captured (normal) HD cam with
    (but I supose that you use the format converter HDcam sr >> HDcam in the setup-menu of the sony)

    blackmagic 29.97fps -jpeg 25% > no time code breaks

    blackmagic 59.94fps -jpeg 25% > no time code breaks

    System G5 – 2.5 dual Ghz / 3.5 GB ram / os 10.3.9 /decklink HD pro dual link in 133Mhz slot / Xraid 5.6 TB

    http://www.2frame.be

  • Bert

    August 3, 2005 at 1:11 pm in reply to: Timecode break using Blackmagic 1080i 59.94 JPEG

    lowering the compression of the JPEG file (50%) might help

    http://www.2frame.be

  • Bert

    August 1, 2005 at 3:01 pm in reply to: Timecode break using Blackmagic 1080i 59.94 JPEG

    check if your Blackmagic deckcontrol is on HDTV59,94

    check your HDcam SR > Format 1080i – 59,94 an TC > dropframe!

    good luck,

    Bert

    http://www.2frame.be

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy