Ben King
Forum Replies Created
-
The Newton 2D physics engine for AE might be worth looking at… https://www.motionboutique.com/newton-physics-simulator-engine-after-effects/
-
Hey guys
I came across this today too – simply remove the plug-in!
If you read your crash reports carefully you can usually see where to find the offending file…
In this case:
/Library/Audio/Plug-Ins/HAL/RazerAudio.plugin/Contents/MacOS/RazerAudio.plugin
“You cannot depend on your eyes when your imagination is out of focus!”
~ Mark Twain -
How have you set up the RAID config?
“You cannot depend on your eyes when your imagination is out of focus!”
~ Mark Twain -
You might also need to update the driver if you are using Leopard here:
https://www.hptmac.com/US/product.php?_index=43&viewtype=download
“You cannot depend on your eyes when your imagination is out of focus!”
~ Mark Twain -
Well…
I’ve been in touch with Highpoint’s Tech support and they say its probably a defective card… I get anyone else here having the same issue would be advised to get theirs replaced too.
However they are extremely slow at responding and their returns department in need of a serious course in basic english, basic operational processes and efficiency.
You will probably wait days for them to get back to you even when asking for something as simple as an address to return the card to!
I’m still trying to resolve this and will be forced to spend $200+ on shipping as Highpoint don’t ship to/from the UK.
So if you can get an RMA from the place you bought it I would, or better still, get your money back and buy your hardware from CalDigit to cheer yourself up and never have to deal with charlatans again!
“You cannot depend on your eyes when your imagination is out of focus!”
~ Mark Twain -
Hey guys
I was following this thread and saw all the issues just as I bought mine! 🙁
I have exactly the same issues with lock-up on large/long reads (no issues on write)
I have the1.2.16.21 firmware
I have tested with 1TB Samsung Spinpoints F1s AND the New 1.5TB Seagate Barracudas and both have exactly the same issues!
Grrrrr
I was wondering if all the electronics (PCB trace, etc) either side of the cable connectors might cause some degradation in the signal between devices if they measure the controller chip to HDD as the total length between devices…
I have two 3m Multilane SFF8088 TO Multilane SFF8088 connections
SAS can have a maximum cable length of 8m (25 feet) so I would think it should be fine, however I read an article on the MegaRAID SAS 8344ELP Controller stating that:
“there are 9 inches of PCB trace (electrical lines on the controller) between the I/O engine and the external connector. This is equuivalent to nine feet, or 2.7 meters of external cabling…”
If this is true then maybe…
I/O Chip 3522>3522 PCB Trace>External connector>Cable>External Connector>RAID PCB Trace>HDDs…
…might be more than, or close to 8m (25 feet)!!!
Can I ask if any/all of you have long SAS/SATA cable lengths?
I would really like to get this working! Otherwise I will have to get an ARC-1211x!
Such a shame Adaptec don’t make their offerings available for Mac (only need drivers!)
Ben
“You cannot depend on your eyes when your imagination is out of focus!”
~ Mark Twain