[Babeker Brahim]

Thank you for your help, I will take into consideration your orientations and I wish you a good day

[Babeker Brahim]

Yes Does the Drive Appear in the Device Manager as Ultrium-5
This drive works with Imperius software and other backup software, but the problem is that when you add another backup, you overwrite the data and I want the sequential backup for archiving the digital data that is in hard drives
What is the difference between the non-stop drive and the normal drive?
What are the advantages of the non-stop reader?

[Babeker Brahim]

Running the HPE LTFS configuration software gives us the message ” No suitable tape drives found ”
Running the L & TT software gives us the message “L & TT does not support this device”.
Running the Smart Storage Administrator software on the Smart Array P222 board diagnostic report in slot 1 we had 2 errors
• 283 Smart Array P222 in connector 1 is disabled because the cache module is not connected

• There is no configurable physical disk connected to the current Smart RAID / HBA.

What’s the solution?
cordially

[Babeker Brahim]

Thanks for your help, The HPE StoreOpen Standalone software has already been installed; but there is a problem after running the HPE LTFS configuration software according to the message ” No suitable tape drives found ”

[Babeker Brahim]

Hi
Configuring the HPE StoreEver LTO-5 Ultrium 3000 SAS External Tape Drive has been successfully completed; now remains to kindly assist us to use it in LTFS

This the tape drive is connected to the HP Smart Array P222 1-Port SAS Controller card by the HP 407344-003 2-Meter External Mini SAS Cable