Forum Replies Created

Page 99 of 118
  • Alex Gerulaitis

    May 12, 2011 at 8:19 pm in reply to: Which Kona are you?

    Bingo, that’s what was missing in the installation. Thanks JC, that did it. It’s an LHe.

    Alex (DV411)

  • Alex Gerulaitis

    May 12, 2011 at 8:00 pm in reply to: RAID 0 mistake. Recovery possible?

    Don’t connect or power up the 2TB drive until Win7 is installed. Theoretically, nothing bad should happen to it during Win7 installation but I am seriously superstitious. 🙂

    Alex (DV411)

  • Alex Gerulaitis

    May 12, 2011 at 4:18 am in reply to: Which Kona are you?

    The AJA TV app does display HD modes (720 and 1080 variants) along with SD modes, in “Display” menu – as does AJA QTToDPXTranslator. Does it mean with absolute certainty that it’s an LHe?

    The G5 doesn’t have an FCP and I don’t want to install it. Is there any other way to test the basic functionality of the card?

    Again, TIA.

    Alex (DV411)

  • Alex Gerulaitis

    May 12, 2011 at 3:51 am in reply to: RAID 0 mistake. Recovery possible?

    [David Roth Weiss] “Forget it Trevor, it’s toast now.”

    Not so fast David! 🙂

    Erasing a file usually means setting a bit in the file allocation table to tell the OS that it’s been deleted. Until something is written in its place (or in the FAT’s record of it), the data is perfectly recoverable.

    Same with partitions – marking the drive part of an array most likely wiped out the partition table; it should still be recoverable if the volume hasn’t been striped or formatted.

    Alex (DV411)

  • Alex Gerulaitis

    May 12, 2011 at 3:43 am in reply to: Which Kona are you?

    Serial markings (back of the card):
    AJA Video G 57712
    VSC 00294484

    On the PCB surface, lower right corner: 102035-01.

    Does it tell you anything?

    [gary adcock] “if not doesnt cutter stevens still work there? he would know. “

    That’s very, very helpful Gary! 🙂 But for the record, he doesn’t.

    Alex (DV411)

  • Alex Gerulaitis

    May 12, 2011 at 3:28 am in reply to: RAID 0 mistake. Recovery possible?

    Acronis Disk Director may help

    https://www.acronis.com/homecomputing/products/diskdirector/

    “Acronis Recovery Expert is a highly reliable data partition and disk recovery tool that prepares you to tackle and repair the results of a personal error, hardware or software failure, virus attack or hacker’s intrusive destruction, fast.”

    They have a free trial – see if it works.

    There are also EASEUS Partition Recovery and “Find & Mount

    Do not do any destructive steps until you are shown a folder structure. 🙂

    Good luck.

    Alex (DV411)

  • Alex Gerulaitis

    May 12, 2011 at 2:25 am in reply to: Connector type on Decklink Quad and 4K?

    Perfect, thank you.

  • Alex Gerulaitis

    May 12, 2011 at 12:27 am in reply to: Connector type on Decklink Quad and 4K?

    Thanks Luke! Decklink Quad and 4K cards ship with no cables or adapters, correct?

    Alex (DV411)

  • Alex Gerulaitis

    May 11, 2011 at 10:50 pm in reply to: Connector type on Decklink Quad and 4K?

    According to the p.54 of the PDF manual, it’s a DIN 1.0/2.3 type connector (see Molex, Amphenol)

    Here is one example of a cable / adapter to standard BNC.

    Alex (DV411)

  • Alex Gerulaitis

    May 10, 2011 at 7:47 pm in reply to: SAN project idea

    Why build it when LVM already exists and works?

    If you have to build your own (for your homework, research, etc.) – just the the source code.

    Alex (DV411)

Page 99 of 118

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy