Forum Replies Created

Page 52 of 118
  • Alex Gerulaitis

    December 14, 2012 at 2:55 am in reply to: Recommendations on a new monitor for video editing

    [walter biscardi] “I would never use one for video output myself.”

    It seems Lillian asked for a monitor that is good for video editing (UI, some monitoring), not video output or critical color monitoring?

  • Alex Gerulaitis

    December 13, 2012 at 5:58 am in reply to: Recommendations on a new monitor for video editing

    Dell U2412M, https://www1.hp.com/wwpc/us/en/sm/WF05a/382087-382087-64283-72270-3884471-5163690.html?dnr=1“>HP ZR2440w are well rated for color accuracy and are within your budget.

    Alex Gerulaitis
    Systems Engineer
    DV411 – Los Angeles, CA

  • Alex Gerulaitis

    December 13, 2012 at 12:45 am in reply to: Affordable raid setup?

    [Frank Gothmann] “The internal setup looks a bit like those found in Norco cases.”

    Non-expander boxes – sure. Norco SAS Expander boxes are still quite a bit more expensive, which makes this one look a little TGTBT (too good to be true).

  • Alex Gerulaitis

    December 13, 2012 at 12:36 am in reply to: Affordable raid setup?

    I ran into this too, and nearly any other SAS expanders are over $1K for a similar box. So it’s a bargain, with a couple of caveats:
    – it’s 3G SAS, not 6G
    – may not work with other enclosure brands for expansion / daisy-chaining
    – Support may be non-existent or hard to reach

    My favorite drives are HGST Ultrastars 7K3000 and 7K4000 series.

    Alex Gerulaitis
    Systems Engineer
    DV411 – Los Angeles, CA

  • If I understood Jesse right, G-Tech is sending a replacement box (eS Pro MiniSAS enclosure) so we’ll know shortly. The box has three key components: power supply, backplane, internal cabling. So if the replacement box fixes the issue, we’ll know it was one of those three things, and that’s likely all we’ll ever know. 🙂

    Alex Gerulaitis
    Systems Engineer
    DV411 – Los Angeles, CA

  • Alex Gerulaitis

    December 12, 2012 at 11:43 pm in reply to: CS6 PrPro performance on MacBook

    [Alan Stephens] “I would guess CUDA.”

    You got it!

  • Alex Gerulaitis

    December 12, 2012 at 11:34 pm in reply to: general thoughts of raid systems

    It’s always cost vs. benefit, and both of these mean different things to different editors (and people).

    In a facility where storage downtime costs $5K an hour, uptime has a different value vs. to someone who edits on the weekends.

    Sure, for some “the cheapest RAID” is the best RAID – and I don’t know too many of those, and they are just unlikely to hire me. 🙂

    Alex Gerulaitis
    Systems Engineer
    DV411 – Los Angeles, CA

  • [Rainer Wirth] “But could it be that this might be the problem? That data is interpreted wrongly?”

    It’s possible, though somewhat unlikely: no moving parts, and it’s one of those things that us usually either on or off. That said, a bent pin on one of the SAS connectors could wreak spectacular (and mysterious) havoc.

    This is one of those cases where crowd-sourced guesswork is good, but won’t necessarily lead to a solution. Someone has to painstakingly go through all possible culprits one-by-one, like the OP and BZ already started: from the host system itself, the controller, cabling, drives, backplane, etc. Eventually the culprit will be found, although the OP is SOL until then. 🙁

    Alex Gerulaitis
    Systems Engineer
    DV411 – Los Angeles, CA

  • [Rainer Wirth] “But how do you get a green/blue light with an intact/corrupt harddisc ?
    I think, with an internal controller. Also fans and temerature? How do you get this data? There must be an internal controller.”

    “I think, therefore I am” 🙂

    A SAS backplane. Not the same thing as a controller.

    Alex Gerulaitis
    Systems Engineer
    DV411 – Los Angeles, CA

  • [Rainer Wirth] “There is a controller in the G-Tech!”

    Not in eS Pro.

Page 52 of 118

We use anonymous cookies to give you the best experience we can.
Our Privacy policy | GDPR Policy