-
Suggested Setup Levels for outputting to various formats…
So… I’m just looking for some feed back here,
But basically, while laying back to any digital formats (Digibeta, HDcam, D5, etc…) our setup should be 0.
And only when laying off to Analog formats such as BetaSP, 3/4″ etc… Then (and only then?) should we have to worry about a setup of 7.5 IRE…
Am I missing something? Or have I correctly deciphered this setup madness?
-Thanks
Joseph Mastantuono
-
2 Replies
-
Check out this article. The deck settings are important in addition to the FCP set-up.
https://www.bobhudson.com/Setup/ -
Check out the following article, which will clear things up in regards to FCP.
https://www.kenstone.net/fcp_homepage/video_levels_nattress.html
My Coles notes explanation of the whole setup issue (with some plagarism from Graeme Nattres’ article above):
In analogue video, all levels are represented by voltages, and measured in IRE or
Reply to this Discussion! Login or Sign Up