• Storage & Archiving

  SSD Raid

  Posted by Carlo Ferraro on March 28, 2014 at 2:26 am

  Using SSD 128GB (USB3.0) for finishing 4K time lapse on FCPX. It gives me around 220 GB/sec on Blackmagic Speed Test and transfers at 13GB/min when going to and coming from a 6TB Raid USB3.
  Tried to a do a software raid on Mac, externally while the raid enclosure arrives and the speed does not increase but about 10% (striped).
  Is that normal? or it has to be done by electronics on the enclosure when it arrives? or it will not increase at all?
  Did the same trial (curious) with a couple of 2,5 sata II 7200rpm 500GB and the speed doubled from about a hundred to 220.

  Imac 27 Quad 3.4, 16GB Ram, 2GB Graphics, 6GB USB3.0 & Esata Raids
  http://www.ferrarofilmsau.com

  Carlo Ferraro replied 12 years, 1 month ago 1 Member · 0 Replies
• 0 Replies

Reply to this Discussion! Login or Sign Up