-
No Audio out of K-Box
So, I finally got the Raid configured properly and can now digitize longer clips (see previous post). I’m coming in from DBC with embedded audio. VU meters are showing the audio but during capture the only playback I get is through the built in speaker on the G5 even though I have audio playback set to AJA Kona. Once the clips are digitized, I still see the bouncing VU meters but now I get no audio from any speakers at all.
Can anybody think of a good reason that the analog audio monitor out on the front of the K-Box wouldn’t want to work? I have it simply plugged into a home theater type of receiver, no mixing board or anything too fancy.
-
1 Reply
-
re-seated the K3 card and everything seems to be working now
Reply to this Discussion! Login or Sign Up