• Apple Final Cut Pro Legacy

  Monitoring options with AJA vs Multibridge studio

  Posted by Gunleik Groven on December 21, 2005 at 9:56 am

  Hi.

  I know the AJA vs BM discussion have been raised a number of times. This is not one more of those posts. -;)

  I have been planning to go for the Multibridge studio and monitor on either a Dell 24″ or a Cinemadisplay.
  I am aware this is not optimal, but reading Graeme’s review of the HD-link, this seems to be my best bet as of budget.
  I am aware that this is considered inferior for monitoring, but at least… then I _have_ an inferior HD monitor solution… -;)

  One thing that sold me on the BM solution was that they annpunce a PCI-X to PCIe adaptor, which would make the card survive an upgrade of my system at a later stage.

  Problem is that this card is not shipping and noone knows when – excpt for “within six months”.

  Does AJA have a similar solution which also covers monitoring?
  It seems that AJA boxes support up- and downconversion in hardware. Is this true?

  Also any experiences with AJA from PAL-land is appreciated.
  I’m told that AJA is _the_ hit in NTSC land, while BM is king of the road in PAL land from my reseller, who sells them both.
  They tell me that in PAL-land, there have been less problems with BM than AJA.

  Gunleik

  Gunleik Groven replied 20 years, 8 months ago 1 Member · 0 Replies
• 0 Replies

Reply to this Discussion! Login or Sign Up