• AJA Video Systems

  HDV to HD-SDI conversion using the HD10AVA Converter

  Posted by Walter Biscardi on October 13, 2006 at 4:01 pm

  Hey guys,

  Just a quick note on a lesson we just learned. We’re converting the Component video output and 2 channel RCA output on our Sony HDV deck to HD-SDI using the new HD10AVA converter.

  We ran into an issue today where there was a cyclical audio static in several tapes captured. This was due to Switch 4 (Audio LVL) being set to Pro Level and not Consumer Level. Technically, this deck is putting out consumer audio levels via RCA.

  Once we made the switch, the audio is clean as a whistle. Just something to get caught up in as I would never have thought of that.

  Thanks to Patrick Belden at Belden Music and Sound for steering us in the right direction on the issue.

  Walter Biscardi, Jr.
  https://www.biscardicreative.com
  HD Editorial & Animation for Food Network’s “Good Eats”
  HD Editorial for “Assignment Earth”

  “I reject your reality and substitute my own!” – Adam Savage, Mythbusters

  Walter Biscardi replied 19 years, 11 months ago 1 Member · 0 Replies
• 0 Replies

Reply to this Discussion! Login or Sign Up