-
Editing XDCAM – which driver?
Hi all!
Apologies in advance for the “she obviously needs coffee” question…
Just got around to installing XDCAM Transfer, but received the following warning: “The XDCAM Drive File System Driver is required….”
Is this the PDW-U1 VFAM (Drive Software and Firmware) Ver. 2.21 to which they are referring?
Thanks in advance for moooo-ving me in the right direction. 😉
— Sue
Mac Pro (8 core) 3 GHz
12 GB RAM
ATI Radeon X1900 (512 MB)Mac OS X 10.5.8
Final Cut Studio 2
FCP 6.0.6 Compressor 3.0.5 Soundtrack Pro 2.0.2 Motion 3.0.2 DVDSP 4.2.1 -
3 Replies
-
Sounds like you have not installed the SxS device driver yet.
Just google it and download and install. Your system cant see the BPAV folder and recognize it as what it needs without it. Hope this helps.Richard Cooper
FrostLine Productions, LLC
Anchorage, AlaskaEveryone has a story to tell.
https://www.FrostLineProductions.com -
You need the Driver <https://www.sony.ca/promedia/drivers.htm> but get Browser and Transfer while you’re at it if using FCP <https://www.sony.ca/xdcamex/software.htm>
Greg Ondera
http://www.Plexus.tv
http://www.SurgeonToday.org -
Thanks guys!
— Sue
Mac Pro (8 core) 3 GHz
12 GB RAM
ATI Radeon X1900 (512 MB)Mac OS X 10.5.8
Final Cut Studio 2
FCP 6.0.6 Compressor 3.0.5 Soundtrack Pro 2.0.2 Motion 3.0.2 DVDSP 4.2.1
Reply to this Discussion! Login or Sign Up