OK, there HAS to be a way to do this. 4K project settings, but only have a 1080p monitor, so I need Resolve/BMD to downconvert the image to 1080p. The BMD interface is set to do it…it works in Avid (a 4K exported file imported into Avid, 4K project…plays full screen on my 1080p broadcast monitor). But when I am in Resolve, the UHD signal won’t downconvert, even though I told it to in the settings. It’s a center punch of the 4K image.
Any idea how to do this? Thanks
Good luck finding something you like… and matching all the HDMI stuff… and finding a calibration you like.
Most of them do support both UHD and 4096 DCI, but not always widely advertised.
I have found there is an advantage to the big screen and 1:1 pixels (frozen pixels a little easier to find), although hard to get
a good fix on resident noise as most of the consumer displays are pretty noisy all by themselves. Before people get their shirst in knots, I’m not talking about graphic source material, wide-gamut goes a different path, and if you have shut off all the BestBuy supersized enhancements, it also exposes the weaknesses in the consumer circuitry.
“I always pass on free advice — its never of any use to me” Oscar Wilde.