-
2 Questions
I’m editing a series of commericals in FCP 4.5. The studio new software is
on the way (mail).To post this client I’ve having two challenges:
#1. I can’t seem to get the title safe access – the info is in gray (grayed out) and not active. Why is that? How can I get it active?#2. Audio Filter. I need to take the main audio and filter it (somehow) to make it sound like a telephone call. Any ideas or suggestions? I’d welcome all contact.
Write here and/or direct to: tv**********@***oo.com.
Thanks
Steve
DFW, TexasSteve Myers Television & DVD Productions
FCP HD, MEDIA 100, Sony Cameras,
30 Years Broadcast Experience
Dallas-Fort Worth, Texas
817-343-6394 -
1 Reply
-
Phone-audio is mostly “mid-range” frequencies and you’ll want to accentuate those.
Try this and adjust my numbers until you like the results:
3-Band EQ (Audio Filter in FCP)
Low: 500 Hz, -10 db
Mid: 2500 Hz +8 db
Hi: 5000 Hz -3 dbYou should watch the volume levels with this much mid EQ, but it should sound “appropriately telephone-bad.”
Another Method is to use the High Pass Filter in FCP.
High Pass Filter>
Frequency: (somewhere between) 1000 Hz and 2500 Hz
Q: (somewhere between) 2 and 5
Reply to this Discussion! Login or Sign Up