-
16g p2 do not mount on MAC pro
Hi guys, i m in front of a problem that i cannot fix. I have a 16 g p2, that i already format and shoot 2 clips on it. Then i plug my firewire to import ( i have fcp 6, and a hvx 200) but the card doesn t mount to the desktop, so impossible to import in fcp i suppose. I check disk utility ( i m on mac pro), i also installed the lastest drivers on the mac. Nothing appears. I there something to set on the camera or on the mac that i don t know. Thank to help me
BART.
-
6 Replies
-
Make sure you’ve installed the update:
https://eww.pavc.panasonic.co.jp/pro-av/support/desk/e/download.htm
-Noah
Unlock the secrets of the DVX100 and Final Cut Pro!
https://www.callboxlive.com -
already did 2 times, restart computer nothing change.
i suppose i have to be in vcr mode on the camera, i m thinking now it maybe my firewire, i don t understand …
-
here are my settings
-
so i tested my firewire and is ok too. I really don t know why the mac doesn t want to recognise the camera ???? thank to help me
-
Holding down the MCR button puts the camera into Firewire device mode. Then the card should appear on your desktop. Workflow info is here:
https://images.apple.com/pro/pdf/L317074A_FCP_Wkflw.pdf
-Noah
Unlock the secrets of the DVX100 and Final Cut Pro!
https://www.callboxlive.com -
See page 84 of your manual or follow below:
in your menu set it to 1394 DEVICE
turn camera off
plug in firwire cable
make sure you’re in P2 mode on the media switch
turn camera on
press the MCR switch once to switch to VCR mode
THEN HOLD DOWN THE MCR SWITCH for 2-3 seconds
you’ll see your lcd screen turn blue then the cards will pop up on your desktopthere you go
David Fisher
Planet Productions
Reply to this Discussion! Login or Sign Up