• AJA Video Systems

  Kona LH component out problem!!

  Posted by Charlie Breguet on June 15, 2007 at 3:56 am

  Hi all, just was wondering if anybody has had a similar problem with their Kona LH…

  system- FCP 5.1.4/OSX 10.4/4gb ram/MAC G5 dual-PCIx

  problem- I am printing/mastering SD timline to Beta SP UVW 1800 via component and after making several successful beta masters I now have a scrambled component output that I can’t correct. I’ve tried rebooting, shutting down, repairing permissions etc…I did try patching the FCP component directly to the monitor via component to make sure it wasn’t my Beta deck.

  Should I re-seat the card or is there something else I should do?

  Much appreciated!

  Charlie

  Charlie Breguet replied 19 years, 1 month ago 3 Members · 4 Replies
• 4 Replies

• 

  Jeremy Garchow

  June 15, 2007 at 4:01 am

  Check your Kona control panel and make sure that you are in fact set to component and not composite + y/c. Reset your AJA easy setup.

  Jeremy
• 

  Charlie Breguet

  June 15, 2007 at 11:57 am

  Hi Jeremy, I did check my control panel last night and it is set to component. I am going to reseat the board this morning and I’ll reset the easy setup.

  Thanks! Charlie
• 

  Arnie Schlissel

  June 15, 2007 at 2:06 pm

  While you’re at it, check your cabling to make sure it hasn’t come loose. If you have another component cable, swap it out.

  Arnie
  Now in post: Peristroika, a film by Slava Tsukerman
  https://www.arniepix.com/blog
• 

  Charlie Breguet

  June 15, 2007 at 5:48 pm

  Thanks for your help. Aja support emailed me today and suggested I trash preferences…I finally got around to it..working like a charm.

  Thanks! Charlie

Reply to this Discussion! Login or Sign Up