[Tom Whitaker]

Thanks for your help, I figured out what the problem was. I was capturing with mixed compression settings, render uncompressed and capture with the DV setting…I set up a new project with all DV settings from the start to finish and everything is working fine now.

Thanks again!

[Tom Whitaker]

importing the clip to a dv project and back worked, Thanks!!!!!!!!!

[Tom Whitaker]

thanks, I had to get home so I’ll try this when I return in the morning…I’ll keep you posted!

[Tom Whitaker]

It is a little better, but still not broadcast quality. I have the quality in the monitor set at highest and I am rendering at 10 bit 4:2:2 for ntsc 4×3. I’m not sure what else could be the problem here unless it is a hardware issue. I have plenty of memory on the scratch drive and 2gig or ram. I am usinig an intel core2 processor with windows vista 64 bit operating system.

Everything has been working great as long as I don’t need to render any intensive effects, dissolves work fine. Any ideas would be welcome, I have to turn this project tomorrow and I really need this color correction to work.

[Tom Whitaker]

trying now…thx

[Tom Whitaker]

Thanks Jon, I tried splitting the audio into mono and it seemed like way more work and trouble then just cutting and pasting…thanks again!

[Tom Whitaker]

Thanks! This will work, I guess it is a couple of extra steps I will get used to. I need to keep channel one and two seperate for archiving purposes so I can use the nat sound on ch2 for future use.

Thanks again,
Tom