Thanks Aja sales/support.
Thanks Ron.
I will use a cheap hub to use the web interface of the mini’s and I will also make sure that they all are running the same F/W version. But you didn’t mention anything regarding the frame drop issue, please advice.
As for the sync and/or recording break issue, here is a brief on how I am planning to use them; I will use a Ross video crossover solo switcher to do the online production, and I will use the sync output of the mixer with a DA to the cameras, the SD-SDI signal from the cameras will be directly connected to the mini’s input and the output of the mini’s will go to the input of the switcher. I will use a Horita TG-50 or a Denecke GR-1 to generate TC and a Horita VDA-50 will distribute the TC to the Mini’s. So system should be sharing the same sync and TC, I believe if i do this way, the recording/sync will not break even if I switch between different inputs.
The only issue will be a frame drop during the recording at any point, I am worried!
Regards,
Tawfiq