[Stephen Bull]

Hi Sean,

[Sean Cole] “insert editing, batch digitising material on the v1-99 tracks, losing opacity nodes once batched, losing the original reference when a time fx is applied..”

I have also experienced all those problems you have mentioned in the 1st month of owning our system. We also seem to get atleast 1 Kernel panic a day whilst editing in Media 100HD, which freezes the system forcing a reboot. We are also frequently getting a bad memory allocation error mesage.

Hopefully a software update is not to far away.

Steve

[Stephen Bull]

Thanks for the quick response Floh,

It is reassuring to know im not the only one experiencing this. (I think)

I had the deck set to 1080/50i, it was the media 100 timeline that was 25fps, so i don’t think this is the problem.

The next time i hire the deck i will try adjusting the “Edit in” timecode to 1 frame before the “Range In” Timecode and see if this fixes the problem. I would love to hear how you go with the tests on your deck.

I will also try posting this in the HD forum, but could we be looking at a possible Media 100HD bug?

Cheers

Steve

[Stephen Bull]

Hi,

I seem to be having the exact same issue with our Media 100 HD system. When mastering a HD 1080 (25FPS) program to a Sony HDW M2000P HDCAM recorder, we are getting a 1 frame difference between the program and the mastered tape. Our program which begins at 00:01:30:00 in our timeline is being recorded to tape at 00:01:30:01. The vision and audio that is recorded appears to be in sync, it is just 1 frame later then it should be.

This is a rental deck and i didn’t have much time to trouble shoot this issue, but i was hoping if i ran through the settings i used maybe someone could check if my workflow is correct. This is the same work flow I previously used with our Media 100i XR system and Digital Betacam VTRs and we had no timecode problems at all.

– Video is connected via HD-SDI
– Audio is connected via Analog XLR
– Deck Control via RS-422 cable
– Audio output is synced to SDI 1

– I set both “LTC” and “VITC” to on
– I then set the TC generator to “Preset” and “Internal” whilst i manually record 10-20 seconds of black video to the start of tape (Starting at 00:00:00:00)
– I then set the TC generator back to “Regen” and “Internal”

– I then select in and out points in the timeline starting at 00:00:10:00 and finishing at the end of the program

– I then go to the “Master to tape” window and:
– Set “Assemble Edit” as the mode
– Set “Selection” as the range
– I then select “timecode” from the destination drop down menu and Media 100 then sets the Edit in to “00:00:10:00” and Edit Out to end of the program.

I would greatly appreciate any feedback that anyone can offer.

Thanks in Advance

Stephen Bull

Dual 2.3GHz G5
Mac OSX 10.4.2
Media 100 HD 10.1.2
4GB Ram
Apple Fibre Channel Card
SanMan 8TB Fibre Channel Raid
Keyspan USB Serial Adapter with V1.8 Driver

[Stephen Bull]

Hi Alex,

I am getting the exact same result of 2 rectangles when trying to print a bin when using the list layout.

However, when using either of the poster Bin layouts my system seems to print fine.

Hopefully this is simple to fix as i have used this feature often with previous versions of media 100.

I am running version 10.1.2 on Mac OSX 10.4.2.

Cheers

Steve