Sep Nolia
Forum Replies Created
-
Wow I can’t believe it! Seriously FINALLY!
It took so long to solve this Problem.
I never knew, that there are effects that are based on CPU and effects that are based on GPU.
I was using effects for the CPU all the time. That’s why I coudln’t see huge differences compared to my old computer.
It’s still weird why It reaches almost 100% but since I noticed this Folder:
https://www.directupload.net/file/d/4170/cc7s4qut_png.htm
I can put tons of effects in the video and it doesn’t lag.Thank you so much Aaron & Wayne for your help!!!
Thank you for all these information! And I also solved my graphic-card PCIexpress 16 v.3.0 problem with your help!But I sitll have a question.
What should I do if I want to use 2 different video-files at the same time?
For example a gopro 1080P 60 frames video and a 4K 24 frames Video.
Because of the different frames and different sony vegas settings it starts lagging again.
Any Ideas? -
Omg! This is really really weird … haha Finally!
Look at this! I changed the slot to one below and it got recognized in the BIOS.
https://www.directupload.net/file/d/4168/34phcsp7_jpg.htm
Afterwards I went to Win 7 installed the latest driver for it but I still had not the full performance.I put the graphic card back to the first slot and it got recognized!
I checked GPU-Z and these are the results. 🙂https://www.directupload.net/file/d/4168/a7vx5s8n_png.htm (x16 v1.1)
https://www.directupload.net/file/d/4168/nnbcqmr7_png.htm (x16 v.3.0 while rendering)But still having my stupid lag issue. =(
At least I’m having a good mind that I don’t have any hardware-problems.
Well I think so … but maybe my CPU has some problems !? -
DMI – gen 2.0 should be disabled.
-DMI gen 2.0 was enabled I switched it to disabled.NB PCIE Configuration – pcie16_1 should be Gen3, not auto.
-pcie16_1 was on auto I switched it to Gen3.But still nothing changed.
GPU-Z still shows the same thing. -
Do you think this graphic-card (pci-express) problem causes my lags?
-
“Have you check the motherboard manual for that X4 or Auto settings? I would think AUTO would work with such new hardware on both the MB and GPU.”
I can’t find anything about it it the manual.But if I want to change to X4 in the BIOS.
It says:
[Auto:] Disable PCIEX16_4 Slot when a M.2 device is detected.
[X4 Mode]: Run at X4 mode for high performance support with m.2 Disabled.
And If I do this I can’t boot to Win 7 anymore. It won’t regocnize the M.2 in X4 Mode -
Yes it is installed in the PCie slot closses to the CPU.
https://www.bilder-upload.eu/show.php?file=d1009a-1447190121.jpg
https://www.bilder-upload.eu/show.php?file=cff6bd-1447190084.jpg
https://www.bilder-upload.eu/show.php?file=a3422e-1447190118.jpg
https://www.bilder-upload.eu/show.php?file=c889fc-1447190123.jpg
https://www.bilder-upload.eu/show.php?file=96d154-1447190061.jpg
(You have to zoom out to see the whole picture)
I connected all my fans on the mainboard instead to the powersuply. Maybe that’s the problem.by the way look at this.
I just noticed this in my bios.
https://www.directupload.net/file/d/4167/ar8449bh_jpg.htm
https://www.directupload.net/file/d/4167/44jz7pzg_jpg.htm
It says “NO VGA Card”. =/ -
Hello my dear internet friends!
I have finally recived my new motherboard .. I had so much trouble with the company getting a new one…
At first they send me my old one back so I had to wait another week to get the new one.
Whatever at least I got it now! 🙂@Wayne Waag & Aaron Star
“In any case, make sure that your project settings are the same as your GoPro footage.”
“If you are trying to create 1080-60P material, your project settings frame rate should be 1920×1080-59.94 Progressive. You can use the Match media Icon Button in the upper right corner to match your project to the source material.”https://www.directupload.net/file/d/4167/u8g2m4ea_png.htm
Thank You!
After I have clicked on yes it doesn’t lag anymore if I want to preview the video in vegas on “Best-full”
(CPU on 15%)But it starts lagging again if I put just one effect inside the video =/
For example the “Glitzen effect” It even lags on “Draft-Quarter” (CPU almost on 100% again, even on draft-quarter)@Aaron Star
“make sure your GPU is selected under Options>Preferences”
-It is selected.Here are some GPU-Z pictures:
–https://www.directupload.net/file/d/4167/egckzl35_png.htm (Graphic-card first tab)
–https://www.directupload.net/file/d/4167/g72i82wu_png.htm (Render test)
–https://www.directupload.net/file/d/4167/ddqhhqfw_png.htm (Bus Interface … It says the graphiccard is on PCI-Express x4 v.1.1 right now. Maybe that’s the whole Problem !? I don’t have much experience about Hardware. I don’t know what it means)–https://www.directupload.net/file/d/4167/vgsu9d23_png.htm (this is what I get on “best-full” without “glitzer effect”)
–https://www.directupload.net/file/d/4167/qx974tbo_png.htm (this is what I get on “draft-quarter”without “glitzer effect”)
–https://www.directupload.net/file/d/4167/y45chgj9_png.htm (this is what I get on “draft-quarter” with glitzer-effect) The values of these 3 aren’t changing just the red-bar. Maybe I forgot to click on something to start the process?——————————————-
Here are the speccy-pictures:
M.2 SSD: https://www.directupload.net/file/d/4167/jsstwkkk_png.htm
DDR 4 2666 Ram: https://www.directupload.net/file/d/4167/3renuzgu_png.htm (weird .. it just shows 1333mhz frequenzy instead of 2666 mhz)
graphic card: https://www.directupload.net/file/d/4167/8k28rnyo_png.htm
motherboard: https://www.directupload.net/file/d/4167/4fdy56ac_png.htm -
Thank you guys really!
Well yea that scks much =/
I hope they will send me the new mainboard as soon as possible. -
Thank you all for the answers!
But I can’t test your ideas anymore … =/Someone suggested me to update my BIOS to solve this problem.
I downloaded the latest BIOS-Driver for my asus x99-a mainboard and installed it.
I had to wait a few secs and when it was done it restarted the computer.
Afterwards I had no screen and the LED thing on my mainboard turned to “99”.It’s broken now =/
I have to send the mainboard back …
-
What codec and file format is your source footage?
-MP4What camera is it from?
-Go Pro Hero Black 4What is your workflow?
What is your display destination for your edited material?
What codec are you rendering to for the final?
Well I just put the 1080P 60 FPS file into the timeline and the preview-windows starts laging if I want to preview the video-file on “Best-Full”, even without any effects.Have you used “AMD system monitor” or GPU-z to verify that the GPU is being used during timeline playback? Is the GPU enabled under preferences? Is your GPU running the latest AMD driver?
I don’t know why but I think that my CPU is the only thing that is running for the preview-mode.
https://www.directupload.net/file/d/4159/sqyf4phc_png.htm
https://www.directupload.net/file/d/4159/9t7nflft_png.htmAnd yes I think that I downloaded the latest driver for the GPU
I have chosen the “W8100” driver.
https://support.amd.com/de-de/download/workstation?os=Windows%207%20-%2064#catalyst-proWhat are your current project settings?
A picture of it:
https://www.directupload.net/file/d/4159/7fkr8jdr_png.htm