Replies – Forums – Scott Tomashek

Forum Replies Created

Scott Tomashek
June 6, 2012 at 11:24 am in reply to: SDI to DVI problem

I don’t think I had that model. I think it was an earlier model without that feature.
Scott Tomashek
May 17, 2012 at 11:53 pm in reply to: SDI to DVI problem

The TV One 1T-C2-511 did the trick. It has some setting you need to get right for it to work. Mostly setting the output color format. I tried AJA and DataVideo and neither worked.
Scott Tomashek
March 25, 2011 at 1:59 pm in reply to: SDI to DVI problem

I got a reply from Panasonic saying that there is a different chip in the projectors with DVI than with HDMI inputs. The HDMI inputs can register RGB or YPbPr. The DVI only recognizes RGB. So I got a converter that converts the SDI to RGB. That didn’t work either because it doesn’t understand 480i, only 720p and 1080i.

So I’m waiting for the third converter to come in.
Scott Tomashek
February 16, 2011 at 7:52 pm in reply to: SDI to DVI problem

My first post on here. I’ll try and move this over to the live IMAG section.
Scott Tomashek
February 16, 2011 at 7:42 pm in reply to: SDI to DVI problem

Coax to the projector, then a 3′ HDMI to DVI cable.

The HDP2 has a scaler in it. I didn’t want to add additional delay to the image (since it is for IMAG) that scaler processing usually introduces.

The cable is just a passive cable. HDMI and DVI are supposed to be electrically identical. This is the first instance I’ve seen where it doesn’t work.
Scott Tomashek
February 16, 2011 at 7:29 pm in reply to: SDI to DVI problem

I don’t have it right in front of me but I don’t believe the HI5 has a USB port. The HI5-3G does.